Products

PrimeLOC attachments

Dual retention Pivoting technology Compatibility   Innovative coating technology The PrimeLOC abutments are coated with Zirconium Carbon Nitride. This tremendously hard, fully biocompatible ceramic PVD (physical vapor deposition) coating is very resistant to wear and abrasion. In addition to its functional surface properties, it has an esthetic rose-gold color. Zirconium accumulates less plaque than titanium and can, therefore, counteract inflammatory processes.     PrimeLOC High Performance Plastic (HPP) retentions inserts PrimeLOC High Performance Plastic retention inserts have a lower tendency to absorb water and high resistance to chemicals and fats,...

Temporary ProImplant implants

LASAK one-piece temporary ProImplant implants enable the temporary treatment of patients with high aesthetic and functional demands with an existing prosthesis or with provisional fixed dentures during the healing period for permanent implants or graft sites. The bendable implant neck enables the provisional implants to be optimally aligned. Immediate provisional restoration Diameter of 2.1mm Easy, straightforward insertion Possibility of parallelism correction   Comfort for patient These temporary ProImplant implants give your patients the opportunity to leave your practice immediately after implantation with a functional denture....

Uni-Base universal titanium bases

Uni-Base universal titanium bases allow the use of a fully digital CAD/CAM design and production process as well as conventional workflow. The Uni-Base AN bases allow the design of an angled screw channel and placing the screw access hole in the ideal position in the crown. Three gingival and coronal heights available Single tooth restorations and bridges Angled screw channels Digital and conventional workflow Reliable retention   CAD libraries Uni-Base bases have been developed with an optimized abutment shoulder respecting an optimized gingival emergence profile....

Surgical and protective gown Europa

&nbsp; &nbsp; Europa Surgical Gowns are certified under UNE EN 13795 &#8211; Meets quality requirements for operating theatres / clean rooms. &nbsp; &nbsp; &nbsp; Features of surgical gown Europa: Knitted collar (color according to size) Size variability thanks to snap buttons in the neck hem Sleeves are finished with seamless knitted cuffs Sewn-in waistband (inside and outside) Loose straight cut Reinforced seams High impermeability against fluids Durable and low-maintenance with an exceptionally long life &nbsp; New-generation surgical gown Europa with accredited quality guarantee: Technotex<sup>®</sup>....

Angulated screw channels

Angulated screw channels help you improve the esthetics of the treatment or allow easier access to the screw channel in a distal region with limited vertical space. LASAK CadCam bridges and abutments allow you to construct an angulated screw shaft up to a 25° inclination in either direction so that the screw access hole of the shaft extends in the ideal position in the crown. In the LASAK BioniQ and IMPLADENT implant systems, you can design the frameworks with your own scanner using the original LASAK CAD library and LASAK scanbodies....

METAPIN titanium membrane tacks

Sterile and ready to use Single packaged Tack placement instrument with precision guide Notice: The METAPIN holder has been discontinued by the manufacturer and can no longer be ordered. METAPIN tacks are available only while current stock lasts. The membrane tacks METAPIN are made out of Titanium in order to guarantee high resistance and maximum biocompatibility. METAPIN are specifically recommended for the placement of both resorbable and non-resorbable membranes even in areas of the jaw where the bone density is higher....

LASAK peace of mind lifetime guarantee

Precise control Before leaving our production plant in Mnichovo Hradiště, each of our products goes through a careful multi-level inspection using top brand measuring devices. All LASAK products are manufactured exclusively by our highly qualified employees. &nbsp; &nbsp; &nbsp; Quality guarantee We stand 100% behind the quality of our products. That&#8217;s why you have a lifetime guarantee from us on LASAK dental implants. We guarantee that, in the case of a loss or failure of an inserted LASAK implant we will replace the implant free of charge,...

BioniQ fully guided surgery

&nbsp; BioniQ fully guided surgery is designed for prosthetics driven individual treatment using BioniQ implants inserted at bone level using a surgical template. The surgical template guides the precise trajectory of the instruments. It is fitted with titanium sleeves with tool stops to reach the pre-planned preparation depth and ensures that when implants are inserted they are precisely positioned according to plan. &nbsp; Modern prosthetics driven treatment Optimal use of prosthetic space for the restoration Precise insertion with a drill template Certainty in anatomically difficult situations Modern technology popular with patients &nbsp;...

BioniQ pilot guided surgery

A simple and cost-effective solution for guided surgery. No special instruments are needed. Besides a surgical template fitted with guide sleeves, you will only need an S2.9 drill for guided surgery. The osteotomy pre-drilled with a pilot drill helps to guide other instruments along the required trajectory. Plan your treatment with your preferred planning software The BioniQ implant system is included in the most commonly used software products. You can plan BioniQ pilot guided surgery in these programs: &nbsp;...

BioniQ guided surgery

&nbsp; In our digital implantology, we offer solutions and services for both pilot guided and fully guided surgery using the BioniQ implant system. Guided work systems can help to improve the results of any implant treatment by positioning the implant more accurately than freehand procedures. In both cases, a surgical template is used as this helps to prepare the implant osteotomy with precision. &nbsp; &nbsp; BioniQ pilot guided surgery Pilot guided surgery ensures that the implant is optimally positioned without increasing the time required for surgery and removes the need for the extensive range of instruments required for fully guided surgery....

Digital implantology

The LASAK BioniQ system has been implemented in the most common software programs for planning, guided implantology and CAD/CAM. Implementation of the system in programs of other developers is still in progress. If you are having difficulties with the availability of the BioniQ system in software that should contain it, please, check that you are using the latest version. Are you using software that does not support the BioniQ system? Please let us know at cadcam@lasak.cz....

Collagene AT

Fully resorbable Highly flexible Supports the healing process &nbsp; The Collagene AT<sup>®</sup> membrane is made of pure lyophilized hypoallergenic collagen of equine extraction. Collagene AT<sup>®</sup> is a membrane with nanometric micro-irregularities at the surface that creates a barrier effect. Amongst the collagen layers with reticular links there are micro spaces of 10-20 microns to prevent cell migration. This barrier effect prevents epithelial and soft connective tissue cells from interfering with bone growth or paradontal tissue growth....

Technology

Thanks to the latest available technologies, our specialists have been working on innovations in, and development of, the CAD/CAM market for more than six years. We use the most accurate scanning technology on the market We have the most accurate scanning technology currently being used in the field of dentistry on the market. The Imetric Scanner offers a precision of less than 5 microns on the screw-retained implant framework. To increase the scanning precision of the implant position,...

Compatibility chart

We are able to mill the frameworks for the following systems and connections. Note: In the LASAK BioniQ and IMPLADENT systems, you can design the frameworks with your own scanner using the LASAK CAD library and LASAK scanbodies. The frameworks are designed using the provided STL data (LASAK CadCam STL) or master cast (LASAK CadCam PRECISION). In other systems, the frameworks are designed using the master cast (LASAK CadCam PRECISION) only. The frameworks are always supplied with compatible fixing screws....

Workflow

1. LASAK CadCam STL The procedure for manufacturing LASAK CadCam frameworks using digital data The frameworks can be designed on scanners using the *STL data file format. In LASAK BioniQ<sup>®</sup> and IMPLADENT systems, you can design the frameworks with your own scanner using the LASAK CAD library and LASAK scanbodies. CAD library data containing files with platforms and scanbodies can be downloaded at the CAD libraries website, where you can find further information....

Delivery terms and overview

Manufacturing and delivery times of LASAK CadCam milled frameworks Examples of standard manufacturing and delivery times for different types of LASAK CadCam milled frameworks. In the listed example, the order is delivered to LASAK on Monday. We accept orders every working day. The below delivery times are valid provided next-day courier service is used. LASAK CadCam overview LASAK CadCam bridges &nbsp; LASAK CadCam bridges, copings – cement-retained &nbsp; LASAK CadCam overdenture bars (CEKA PRECI-HORIX / DOLDER – U,...

LASAK CadCam general terms and conditions

Ordering production materials Materials are to be ordered by means of the LASAK CadCam order form. The order, made by means of the order form and then acknowledged, is considered as being a valid order for both parties. Pricing The prices for the materials ordered are in accordance with the prices shown in the LASAK CadCam price list, valid at the date of the order. All prices shown in the price list do not include any commission,...

Instruments

The IMPLADENT implant system includes a standardized set of instruments, guaranteeing atraumatic surgery during the implant insertion, and an ideal congruence between the implant and the bone bed. The surgical instruments are well-arranged in the tool organizer, enabling surgeons to carry out fast and atraumatic operations, and allowing other members of the attending team to ensure the precise preparation of the operation phase. Similarly to the first implantation phase, instruments are also supplied for purposes of prosthetic treatment,...

Implant types

IMPLADENT dental implants are made of commercially pure titanium, with a varying surface finish of the intraosseal part. The self-drilling screw shape of the implants helps considerably to achieve a high level of primary stability. Thanks to the bioactive implant surface, the remedial stage is now faster, thus ensuring fixed bonds between the bone tissue and the surface of an implant – a process also referred to as osseointegration. An osseointegrated implant ensures a balanced distribution of mechanical strain on the bone tissue,...

BIO-surface

Speeded-up formation of a functional bone-implant contact Reduction of treatment time Immediate loading The unique alkali-treated bioactive surface of the implant accelerates the process of bone-implant contact formation, providing the implant with increasing secondary stability at the earliest stages of healing. This phenomenon helps to reduce the healing time and enables early and immediate loading to become a predictable and safe treatment protocol. Bioactive Hydrophilic Nano-structured surface of implants Hydrophilic BIO-surface As a result of long-term,...

Materials and technologies

Premium US titanium Premium grade titanium from US supplier is used in the production of LASAK implants. The titanium material conforms to LASAK Corporate Standard (PN 04-00-04) requiring material properties significantly superior to those specified in ISO 5832-2 (the standard used by most producers). Extreme precision Swiss machining technology LASAK is a proud partner of TORNOS SA, one of the world&#8217;s leading producers of extreme precision turning technology which is used in the electronics, micro-mechanics, and medical and dental industries....

Instruments

Minimized number of instruments Instruments optimized for soft and dense bone preparation Instruments for both Straight and Tapered implants in one cassette The BioniQ dental implant system includes a standardized instrument cassette containing all the necessary instruments for both the surgical and prosthetic stages of the treatment. Surgical instruments for both types of implants, including all diameters and lengths, are included in every surgical cassette. The instrument organizer helps to intuitively arrange the instruments in the correct sequence which makes the surgery atraumatic,...

Implant types

BioniQ dental implants are manufactured from high-strength pure titanium from premium US supplier. The titanium material conforms to the LASAK Corporate Standard requiring material prosperties significantly superior to those specified in the common standard, (ISO 5832-2). The screw shape of the implants ensures a high level of stability of the inserted implant together with maximum preservation of the bone tissue structure. Insertion is fast and easy. The bioactive surface of the implant speeds up the healing process and enables the formation of a strong bond between the bone and the implant surface. ...

Hydrophilic BIO-surface

Faster formation of a functional bone-implant contact Reduced time required for the early healing phase Immediate loading The unique alkali-treated bioactive surface of the implant accelerates the process of bone-implant contact formation, providing the implant with increasing secondary stability at the earliest stages of healing. This phenomenon helps to reduce the healing time and enables early and immediate loading to become a predictable and safe treatment protocol. Bioactive Hydrophilic Nano-structured surface of implants Hydrophilic BIO-surface The LASAK company was the first company that launched a bioactive,...

Prosthetic flexibility

Yellow-colored QN (Q-Lock Narrow) prosthetic components are intended for narrow S2.9 implants. Blue-colored universal QR (Q-Lock Regular) prosthetic platform for five types of implants (S3.5, T4.0, S4.0, T5.0, S5.0). Dual-function connection offers internal conical connection for single tooth restorations as well as external platform for bridge restorations (e.g. LASAK CadCam bridges). Color-coding is used for the prosthetic components and the internal part of the implant. Blue color-coding is used for the QR prosthetic platform and yellow color-coding is used for the QN prosthetic platform....

Q-Lock connection

The implant-abutment Q-Lock connection is a unique combination of four stabilizing components: Deep cone ensures stability and tight seal of the connection Solid hexagon as an anti-rotation element Reinforcing cylinder – tube in tube Cone under the screw head &nbsp; Fatigue strength of the implant-abutment connection (ISO 14801) Sources: M. Wieland, H. Hornberger, Mechanical testing of fatigue strength, Bone level implant scientific overview, Starget 2010–1, experimental data from LASAK, Report – Accredited testing laboratory for mechanical tests at the Czech Technical University in Prague,...

Advantages of BioniQ system

Q-Lock connection The implant-abutment Q-Lock connection is a unique combination of four stabilizing components: Deep cone ensures stability and tight seal of the connection Solid hexagon as an anti-rotation element Reinforcing cylinder – tube in tube Cone under the screw head High fatigue strength of the implant-abutment connection (ISO 14801) The stress of the implant and the abutment is examined through the use of a chewing kinematics strength test. The test consists of 5 million cycles,...

IMPLASPIN

Accelerated osseointegration Excellent primary stability High-strength The function of the osseoconductive spinal intervertebral disc is to prevent instability of the affected motion segment of the lumbar or cervical spine. Osteoconductive implants, developed by the LASAK company, represent a new generation of biomaterials to replace bone tissue. The main characteristics of these implants are the excellent mechanical and significant osteoconductive properties of their surface, which enable faster and better healing of the implant. The implant is manufactured from pure titanium with a chemically treated surface or from PEEK-OPTIMA&#x2122;...

Cranio-Oss

Exact geometry from CT data Excellent biocompatibility – Ti, PEEK No adjustments required during surgery Maximum surface in contact with the bone Cranio-Oss custom implants are indicated for anatomical reconstructions of bone defects in the area of the cranial vault and face caused by decompressive craniectomy; comminuted fractures and fractures with a loss of bone tissue; bone removal due to a tumour, inflammation, infection or rejection of previously implanted material. Cranio-Oss custom implants are made from synthetic biomaterials – technically pure titanium (c....

PORESORB-TCP

Resorbability High phase purity Osteoconductivity High stability in defect PORESORB-TCP is a bioactive, resorbable, inorganic bone regeneration material. It creates stable contact with bone and prevents the formation of a soft tissue interlayer. PORESORB-TCP has osseoconductive and osseoinductive properties which significantly increase the treatment efficiency. As a phase-pure β-tricalcium phosphate matrix with an interconnecting porosity it can be completely resorbed and gradually replaced by newly formed bone. PORESORB-TCP as a fully synthetic material avoids any potential immunological or infection risks arising from materials of biological origin....

OssaBase-HA

Macro and nano bone-like structure Excellent volume maintenance Low substitution rate OssaBase-HA is a synthetic, macro- and nanoporous bone regeneration material based on hydroxyapatite with a low substitution rate. It is used for the bone regeneration of missing or lost bone tissue independently, or in combination with autologous bone tissue, blood or PRP. OssaBase-HA features up to 83% interconnected porosity to support vascularized bone formation. Its low substitution rate helps to provide long-term graft stability and the maintenance of volume when a longer healing time is required or if re-entry to the site may be delayed....

Customizable Cast-On abutments

Anatomically optimal solution Case specific angulation Time- and cost-effective Indication range Deep soft tissue Requirement for case specific customizable abutment angulation Incorrectly aligned anti-rotation element Specific requirement for an emergence profile Suitable for cement-retained and screw-retained restorations Specification The LASAK Cast-On abutment is an universal easy-to-process solution for implant-supported restorations. Our Cast-On abutment offers a cost-effective option for castable abutments made from gold alloys and is available for all major implant systems. It gives the technician maximum flexibility for customized contouring of the abutment and gingival emergence profile in accordance with individual requirements....

LASAK CadCam bridges and abutments

Bridges and abutments High precision – perfect, passive fit Homogenous structure – free of internal defects Direct fixation to implants without abutments Time- and cost-effective Benefit from a CAD/CAM system and increase the precision of your implant-supported frameworks. &nbsp; LASAK CadCam technology A unique production system of precise superstructures. Direct fixation in dental implants without the use of abutments or other connecting elements. Reduced number of gaps, between the implant and the superstructure, which can be a potential source of bacterial contamination....

IMPLADENT implant system

Bioactive, nanostructured and hydrophilic surface Long-term scientific documentation Two designs of implants – tapered and straight The IMPLADENT implant system Dental, two-phase implantology system enabling differentiated therapy, selected with regard to each individual patient. The two-phase method respects the conditions for successful healing of the implant. The implant isn´t loaded during the healing phase and is covered with mucosa and isolated from the oral cavity. Suitable for late, delayed or even immediate implantation. It comprises a number of graduated elements for prosthetic reconstruction and suitable temporary solutions....

BioniQ implant system

Easy and effective The combination of deep cone, solid hexagon and reinforcing cylinder ensures maximum strength of the implant-abutment connection Built-in platform shifting for high tissue volume and stability Conical apex and self-cutting thread ensure safe and fast insertion Hydrophilic BIO-surface speeds up osseointegration proven in fifteen years’ clinical use BioniQ dental implant system The system philosophy emphasizes ease and effectivity. The implant system includes both cylindrical Straight and conical Tapered implants. Surgical instruments for all types of implants,...

Action

Studies

Spondylosurgery

Clinical studies Development and Clinical Evaluation of Bioactive Implant for Interbody Fusion in the Treatment of Degenerative Lumbar Spine Disease.; Filip M., Linzer P., Strnad J.: Low Back Pain Pathogenesis and Treatment, 2012, 201–220. The book is reached by clicking on the link. Bioactive titan cage Implaspin in treatment of degeneratie disease of the cervcal spine – the results from 2007 till 2008, Chirurgia Narządów Ruchu i Ortopedia Polska; Filip M., Linzer P., Šámal F., Jurek P.,...

Bone regeneration

Clinical studies Two-stage Lateral Maxillary Sinus Lift using Autogenous Bone and β-Tricalcium Phosphate: Clinical and Histomorphometric Evaluation; Mounajjed R., Strnad J., Cevallos Lecaro M.: Madridge J Dent Oral Surg. 2020; 5(1): 96-100 Histological assessment of tissue from large human bone defects repaired with b-tricalcium phosphate; Kučera T., Šponer P., Urban K., Kohout A.: Eur J Orthop Surg Traumatol 2014 DOI 10.1007/s00590-013-1329-4. In vivo behaviour of low-temperature calcium-deficient hydroxyapatite: comparison with deproteinised bovine bone; Šponer P., Strnadová M.,...

Implantology

A high level of marginal bone conservation The main factor affecting patient satisfaction following implant installation is the provision of good functionality and an optimal esthetic outcome. Natural-looking esthetics ensure the stability of the alveolar bone in accordance with the physiological dimension of soft tissue (biological width). This can be achieved only if the implant, framework and dental prosthesis work in perfect harmony. The results of the study/studies show that BioniQ products have this symbiosis. Thanks to this,...

History of LASAK

Long-term cooperation

The LASAK company has a continuing systematic research and development, which is carried out in cooperation with a number of scientific institutions. In addition to theory, practice is also important and, therefore, LASAK has long been working with leading specialists and experts from many universities and leading research and clinical establishments in the Czech Republic and abroad. &nbsp; Universities &nbsp; &nbsp; Institutions &nbsp;...

Innovation

New production for LASAK’s S2.9 dental implantology system The LASAK company has started implementing another project, partially supported by the European Regional Development Fund, specifically the Operational Program “Enterprise and Innovation for Competitiveness”. Within the project, the production capacity of the company’s plant in Mnichovo Hradiste, Czech Republic, will be increased and the plant will be equipped with state-of-the-art equipment for the production of LASAK’s new S2.9 dental implantology system. Lear more about the Operational Program at www.agentura-api.org....

Company profile

LASAK focuses on the development, manufacture and sale of innovative healthcare products, particularly bone and dental implants and bone regeneration materials. The company was founded 1991 by doc. Ing. Zdeněk Strnad, CSc. and Ing. Igor Riedl, CSc. In addition to its production activities, the company systematically pursues its own research and development programs in co-operation with leading scientific institutions, universities and prestigious clinics throughout the Czech Republic, focusing above all on the development of new biomaterials....

We give back

At LASAK, we respect our community and meet our moral obligations to regularly support those who really need our help. LASAK provides financial and material support to foundations, non-profit organisations, public benefit organisations, and civic associations that offer social assistance to those in need. We are proud to say we have given a helping hand to the following projects and organisations: Slunecnice Centre We have been working with the Slunecnice Centre since 2005. The Slunecnice Centre helps people affected by challenging life situations (in particular people with disabilities,...

Static pages

LASAK conference IMPLANTOLOGY 2025 video report

On Friday, April 4, 2025, the 27th edition of the IMPLANTOLOGY conference took place at the modern STAGES HOTEL Prague. This long-standing event brings together implantology specialists, dentists of all disciplines, dental technicians, and dental students from both the Czech Republic and abroad every year. This year’s conference featured a wide range of topics, from advanced surgical techniques and the use of digital technologies to long-term implant maintenance. All the speakers talked about their own experiences in these areas....

The IMPLANTOLOGY 2025 conference offered an inspiring programme and a welcoming atmosphere.

On Friday, April 4, 2025, the 27th edition of the IMPLANTOLOGY conference took place at the modern STAGES HOTEL Prague. This long-standing event brings together implantology specialists, dentists of all disciplines, dental technicians, and dental students from both the Czech Republic and abroad every year. This year&#8217;s conference featured a wide range of topics, from advanced surgical techniques and the use of digital technologies to long-term implant maintenance. All the speakers talked about their own experiences in these areas....

We are participating in IDS 2025 in Cologne!

We are pleased to invite you to visit our stand at IDS, the world&#8217;s leading dental industry trade fair, in Cologne. Join us from March 25 to 29, 2025, at booth E-058/F-059 in hall 2.2 to meet our LASAK team in person. As in previous years, we are participating in IDS to personally connect with you, our partners, and to introduce our new products to the international audience. This year, we are focusing on solutions for narrow spaces: our temporary ProImplant implants with a diameter of 2.1 mm and the 2.9 mm BioniQ implants,...

IMPLANTOLOGY 2025 Scientific Conference

We are delighted to invite you to the 27<sup>th</sup> annual IMPLANTOLOGY 2025 Scientific Conference, held in new premises, the ‘STAGES HOTEL’ Prague, declared “Building of the Year 2022”. As usual, we will be hosting a range of interesting speakers from the Czech Republic and abroad. Don’t miss out on the latest topics in implantology. Join us in celebrating 27 years of this traditional symposium during a social evening featuring a lavish banquet accompanied by some interesting tasting sessions....

Implant prosthetics for atrophied maxilla and mandible using 2.9mm BioniQ implants

Treatment of patients with maxillary and mandibular atrophy is a complex challenge in implant prosthetics. In his case report, Dr. Volker Bonatz describes the complete surgical and prosthetic reconstruction in a patient who had severely atrophied jaw anatomy and an insufficient number of residual teeth. Pilot guided surgery offered the greatest freedom. Based on the analysis of the anatomical structures, BioniQ implants with a diameter of 2.9 mm were used. Complete case report &#8220;Implant prosthetics of the atrophied maxilla and mandible....

NEW: BioniQ clinical casebook

The LASAK BioniQ implant system, highlighted in this clinical casebook, prioritizes both simplicity and effectiveness. It meets the rigorous demands for long-term functionality and esthetics in dental implantology. This contemporary system provides versatile instrumentation, accommodating both freehand and guided surgical techniques. Contents: Delayed implantation and immediate loading in a teenager in the esthetic zone Immediate implantation and minimally invasive shaft-seal technique BioniQ guided surgery in case of low bone volume Implantation with BioniQ pilot guided drilling in combination with dynamic navigation The right dental implant prosthetics for long-term success with BioniQ Plus implants Computer-assisted surgical procedures with LASAK BioniQ implants Implants and prosthetics for the ageing patient Complete denture reconstruction with BioniQ and BioniQ Plus implants &nbsp;...

Retrospective Analysis of Primary Failure of Dental Implants

The type of implant and the method of implantation are believed to have a significant influence on primary failure. The aim of this retrospective study was to determine the reliability of osseointegration of BioniQ implants (LASAK s.r.o., Czech Republic) based on the rate of primary failure and to analyze the causes of failure in detail. The primary failure rate of BioniQ implants was 2.35% of all implants and 0.6% when augmentation procedures are excluded. This represents a result,...

IMPLANTOLOGY 2024

The scientific conference IMPLANTOLOGY with serial number 26 is over. On Friday, 19 April, Stages Hotel Prague hosted experts in dental implantology. The attractiveness of the topics and the speakers is evidenced by the tremendous interest of the audience. So huge that the conference hall was filled to the last seat and we thank all the participants for that. MUDr. Jan Dražan prepared a lecture for the audience called Large maxillary and mandibular reconstructions using implants....

BioniQ product catalog 2024

We are pleased to announce the release of our new BioniQ 2024 catalog. The BioniQ implant system is designed for simplicity, maximizing efficiency while minimizing costs. However, in response to feedback and requests from you, our clients, we are introducing several new features with this catalog. We are able to do this primarily because LASAK is the direct manufacturer of the BioniQ implant system. This means you often communicate directly with our research and development team,...

Total Tooth Reconstruction Using Dental Implants

Treatment with dental implants in patients with edentulous jaws faces many problems. First and foremost is the patient&#8217;s overall health and ability to undergo a relatively extensive surgical procedure. Another issue is the local sufficiency of the alveolar bone to place a sufficient number of implants. This involves planning the number and placement of implants. This consideration is directly related to the type of prosthetic reconstruction and the suitability of its use, not only with respect to the patient profile but also the properties of the materials used for prosthetic reconstruction....

Cookies

LASAK s.r.o., company ID: 44265786, (hereinafter also referred to as LASAK s.r.o.), as the operator of the website www.lasak.com  (hereinafter also referred to as the &#8220;Website&#8221;), hereby issues the following notice to the users of the Website (hereinafter also referred to as &#8220;Users&#8221; or &#8220;You&#8221;) about cookies used on the Website (hereinafter also referred to as the &#8220;Cookie Notice&#8221; or &#8220;Notice&#8221;). What are &#8220;cookies&#8221;? Cookies (or cookie files) are text (data) files containing small amounts of information (data) that are stored on a user&#8217;s computer,...

Sirona library

The CEREC<sup>®</sup> BioniQ Ti bases facilitate the use of the CEREC<sup>®</sup> system for the prosthetic treatment of the BioniQ implant. The necessary data on the milling of the CEREC<sup>®</sup> BioniQ QR base is available in all the versions of the inLab-Sirona software. The CEREC<sup>®</sup> BioniQ QN base was tested using inLab Sirona SW 16.0. Older versions of the SW do not contain the necessary data for CEREC<sup>®</sup> QN base milling....

You are cordially invited to the IMPLANTOLOGY 2024 Scientific Conference

A traditional gathering of dental implantology experts For the 26th time, Prague will welcome dental implantology experts from the Czech Republic and abroad. We are delighted to invite you to the IMPLANTOLOGY 2024 Scientific Conference, held on 19 April 2024 in the state-of-the-art ‘Stages Hotel’ in Prague. Discover new dental implantology trends and share your experience with renowned experts from the Czech Republic and abroad. The agenda features some fascinating talks by doc. MUDr. Martin Starosta,...

Uni-Base bases – 3.5mm (manually shortened)

LASAK BioniQ library for Uni-Base 3.5mm titanium bonded bases (Uni-Base 3.5mm) The library contains Uni-Base titanium bonded bases that are manually shortened to a coronal height of 3.5 mm. The library contains Uni-Base straight and Uni-Base AN – angled data for the BioniQ system. The library includes data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow), including all types of scanbodies.    Current version V1.2    Library structure...

Uni-Base titanium bonded bases – 3.5 mm (manually shortened)

LASAK BioniQ library for Uni-Base titanium bonded bases (Uni-Base), scanbody – long The library contains Uni-Base titanium bonded bases (straight and angled screw channels) for the BioniQ system. The library contains data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow). Use: Designed for laboratory and intraoral scanning. Designed for scanbodies Ref. No.: BioniQ QR, indexed – long 2815.00 BioniQ QN, indexed – long 2840.00    Current version V1.3    Library structure...

Uni-Base titanium bonded bases – 3.5 mm (manually shortened)

LASAK BioniQ library for Uni-Base titanium bonded bases (Uni-Base), scanbody – SOLO The library contains Uni-Base titanium bonded bases (straight and angled screw channels) for the BioniQ system. The library contains data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow). Use: The scanbody is intended for scanning a single tooth (solo work). The scanbody has ideal dimensions for precise scanning in the narrow interdental space. The scanbody has an optimized gingival part (emergence profile) for easy insertion into the implant....

Uni-Base titanium bonded bases – 3.5 mm (manually shortened)

LASAK BioniQ library for Uni-Base titanium bonded bases (Uni-Base), scanbody – narrow The library contains Uni-Base titanium bonded bases (straight and angled screw channels) for the BioniQ system. The library contains data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow). Use: Designed for laboratory and intraoral scanning. Designed for scanbodies Ref. No.: BioniQ QR, indexed &#8211; narrow 2876.00 BioniQ QN, indexed &#8211; narrow 2877.00    Current version V1.3    Library structure...

Uni-Base titanium bonded bases – 3.5 mm (manually shortened)

Individual types of scanbodies require the use of a corresponding library. In the next step, it will be possible to download the library for the combination of a specific type of base and scanbody. The libraries contain data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow). The libraries include Uni-Base titanium bases – manually shortened to a coronal height of 3.5 mm. The libraries contain Uni-Base straight and angled data for the BioniQ system....

Uni-Base titanium bonded bases – angled

LASAK BioniQ library for Uni-Base AN titanium bonded bases (Uni-Base AN), scanbody – long The library contains Uni-Base AN bonded titanium bases for angled screw channels for the BioniQ system. The library includes both BioniQ QR (blue) and BioniQ QN (yellow) prosthetic platform sizes. Use: Designed for laboratory and intraoral scanning. Designed for scanbodies Ref. No.: BioniQ QR, indexed &#8211; long 2815.00 BioniQ QN, indexed &#8211; long 2840.00    Current version V1.0.0    Library structure...

Uni-Base titanium bonded bases &#8211; straight

LASAK BioniQ library for Uni-Base titanium bonded bases (Uni-Base), scanbody – long The library contains Uni-Base titanium bonded bases (straight screw channels) for the BioniQ system. The library contains data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow). Use: Designed for laboratory and intraoral scanning. Designed for scanbodies Ref. No.: BioniQ QR, indexed – long 2815.00 BioniQ QN, indexed – long 2840.00    Current version V1.0.1    Library structure...

LASAK ProImplant temporary implants with Ø 2.1 mm

ProImplant temporary implants from medical manufacturer LASAK, with 30 years of experience in dental implantology, enable the temporary treatment of patients with an existing prosthesis or with provisional fixed dentures during the healing period for permanent implants or graft sites. The insertion is straightforward and can be carried out with minimal instruments (sometimes with just two). The one-piece implants with a diameter of 2.1 mm are made from pure Titanium Grade 4. The bendable implant section enables the provisional implants to be optimally aligned....

LASAK CadCam bonded abutments (Ti base)

LASAK BioniQ library for LASAK CadCam bonded abutments (Ti-base), scanbody long The library contains LASAK CadCam bonded abutments (Ti base) for the BioniQ system. The library contains data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow). Use: Designed for laboratory and intraoral scanning. Designed for scanbodies Ref. No.: BioniQ QR, indexed – long 2815.00 BioniQ QN, indexed – long 2840.00    Current version V1.0.4    Library structure...

LASAK CadCam bonded abutments (Ti base)

LASAK BioniQ library for LASAK CadCam bonded abutments (Ti-base), scanbody – SOLO The library contains LASAK CadCam bonded abutments (Ti base) for the BioniQ system. The library contains data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow). Use: Designed for laboratory and intraoral scanning. Designed for scanbodies Ref. No.: BioniQ QR, indexed – SOLO 2881.00 BioniQ QN, indexed – SOLO 2882.00    Current version V1.0.4    Library structure...

LASAK CadCam bonded abutments (Ti base)

LASAK BioniQ library for LASAK CadCam bonded abutments (Ti-base), scanbody &#8211; narrow The library contains LASAK CadCam bonded abutments (Ti base) for the BioniQ system. The library contains data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow). Use: Designed for laboratory and intraoral scanning. Designed for scanbodies Ref. No.: BioniQ QR, indexed &#8211; narrow 2876.00 BioniQ QN, indexed &#8211; narrow 2877.00    Current version V1.0.4    Library structure...

Premill abutments

LASAK BioniQ library for Premill abutments, scanbody &#8211; long The library contains Premill abutments for the BioniQ system. The library contains data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow). Compatible with NT-trading or Amann Girrbach holder. Use: Designed for laboratory and intraoral scanning. Designed for scanbodies Ref. No. BioniQ QR, indexed – long 2815.00 BioniQ QN, indexed &#8211; long 2840.00    Current version V1.0.1    Library structure...

Premill abutments

LASAK BioniQ library for Premill abutments, scanbody &#8211; narrow The library contains Premill abutments for the BioniQ system. The library contains data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow). Compatible with NT-trading or Amann Girrbach holder. Use:  Designed for laboratory and intraoral scanning. Designed for scanbodies Ref. No. BioniQ QR, indexed &#8211; narrow 2876.00 BioniQ QN, indexed &#8211; narrow 2877.00    Current version V1.0.1    Library structure...

Premill abutments

Individual types of scanbodies require the use of a corresponding library. In the next step, it will be possible to download the library for the combination of a specific type of abutment and scanbody. The libraries contain data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow). Compatible with NT-trading or Amann Girrbach holder. Select the type of scanbody     ...

One-piece (integral) connection

LASAK BioniQ library for One-piece (integral) connection, scanbody – long The library contains data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow). The library includes integral dummies for the BioniQ system. To complete the work, the data must be sent to the LASAK milling center. Use: Designed for laboratory and intraoral scanning. Designed for scanbodies Ref. No. BioniQ QR, indexed – long 2815.00 BioniQ QN, indexed – long 2840.00    Current version V1.0.5    Library structure...

3D print components

LASAK IMPLADENT library for 3D print components The library includes analog data for the IMPLADENT system. The library contains data for both prosthetic platforms &#8211; IMPLADENT D2.9 (red) and D3.7 (green). This library is required for creating 3D models in the Model Creator system.    Current version V1.4.0 &nbsp;...

LASAK CadCam bonded abutments (Ti base)

LASAK BioniQ library for LASAK CadCam bonded abutments (Ti-base) The library contains LASAK CadCam bonded abutments (Ti base) for the BioniQ system. The library includes data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow), including all types of scanbodies.    Current version V1.0.0    Library structure...

Uni-Base titanium bonded bases

LASAK BioniQ library for Uni-Base titanium bonded bases (Uni-Base) The library contains complete data for Uni-Base titanium bonded bases for the BioniQ system. The library includes data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow), including all types of scanbodies. The library contains data for Uni-Base straight, AN &#8211; angled and manually shortened variant of 3.5 mm bases.    Current version V1.1    Library structure...

LASAK CadCam bonded abutments (Ti base)

LASAK IMPLADENT library for LASAK CadCam bonded abutments (Ti base) The library contains the conical connection for LASAK CadCam bonded abutments (Ti base) of the IMPLADENT system. The library contains data for both prosthetic platforms &#8211; IMPLADENT D2.9 (red) and D3.7 (green).    Current version V1.0.5    Library structure...

LASAK CadCam bonded abutments (Ti base)

LASAK BioniQ library for LASAK CadCam bonded abutments (Ti-base) The library contains LASAK CadCam bonded abutments (Ti base) for the BioniQ system. The library includes data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow), including all types of scanbodies.    Current version V1.0.3    Library structure...

Uni-Base bases – angled

LASAK BioniQ library for Uni-Base AN titanium bonded bases (Uni-Base AN) The library contains Uni-Base AN titanium bonded bases (angulated screw channels) for the BioniQ system. ASC permission up to 25° with positioning function after 60°. The library includes data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow), including all types of scanbodies.    Current version V1.2    Library structure...

Uni-Base titanium bonded bases

The libraries are divided into Uni-Base &#8211; straight, which allows the production of a standard straight screw channel, Uni-Base AN &#8211; angled, with which it is possible to make angled screw channels and Uni-Base &#8211; shortened for manually shortened bases, so that your individual prosthetic work achieves the best possible aesthetic result. The libraries contain data for both prosthetic platforms &#8211; BioniQ QR (blue) and BioniQ QN (yellow), including all types of scanbodies. Choose a product category     ...

LASAK CadCam bonded abutments (Ti base and Uni-Base)

Libraries of abutments for titanium bonded bases of the BioniQ system. The libraries are divided into the innovative Uni-Base titanium bases and the older type of LASAK CadCam titanium abutments (Ti base). The libraries contain data for both prosthetic platforms &#8211; BioniQ QR (blue) and BioniQ QN (yellow), including all types of scanbodies. Choose a product category   ...

One-piece (integral) connection

LASAK BioniQ library for One-piece (integral) connection, scanbody – SOLO The library contains data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow). The library includes integral dummies for the BioniQ system. To complete the work, the data must be sent to the LASAK milling center. Use: Designed for laboratory and intraoral scanning. Designed for scanbodies Ref. No. BioniQ QR, indexed – SOLO 2881.00 BioniQ QN, indexed – SOLO 2882.00    Current version V1.0.5    Library structure...

One-piece (integral) connection

Individual types of scanbodies require the use of a corresponding library. In the next step, it will be possible to download the library for the combination of a specific type of abutment and scanbody. The libraries contain data for both sizes of prosthetic platform – BioniQ QR (blue) and BioniQ QN (yellow). The library includes integral dummies for the BioniQ system. To complete the work, the data must be sent to the LASAK milling center. Select the type of scanbody     ...

LASAK CadCam bonded abutments (Ti base)

LASAK IMPLADENT library for LASAK CadCam bonded abutments (Ti base) The library contains the conical connection for LASAK CadCam bonded abutments (Ti base) of the IMPLADENT system. The library contains data for both prosthetic platforms &#8211; IMPLADENT D2.9 (red) and D3.7 (green).    Current version V1.0.0    Library structure...

Uni-Base bases – straight

LASAK BioniQ library for Uni-Base titanium bonded bases (Uni-Base) The library contains complete data for Uni-Base titanium bonded bases for the BioniQ system. The library includes data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow), including all types of scanbodies.    Current version V1.2    Library structure...

LASAK CadCam bonded abutments (Ti base)

LASAK IMPLADENT library for LASAK CadCam bonded abutments (Ti base) The library contains the conical connection for LASAK CadCam bonded abutments (Ti base) of the IMPLADENT system. The library contains data for both prosthetic platforms &#8211; IMPLADENT D2.9 (red) and D3.7 (green).    Current version V2.0.0    Library structure...

Uni-Base titanium bonded bases &#8211; angled

Individual types of scanbodies require the use of a corresponding library. In the next step, it will be possible to download the library for the combination of a specific type of base and scanbody. The libraries contain data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow). The libraries include Uni-Base AN bonded titanium bases – angled screw channels for the BioniQ system. ASC permission up to 25° with positioning function after 60°....

Uni-Base titanium bonded bases – angled

LASAK BioniQ library for Uni-Base AN titanium bonded bases (Uni-Base AN), scanbody – SOLO The library contains Uni-Base AN bonded titanium bases for angled screw channels for the BioniQ system. The library includes both BioniQ QR (blue) and BioniQ QN (yellow) prosthetic platform sizes. Use: The scanbody is intended for scanning a single tooth (solo work). The scanbody has ideal dimensions for precise scanning in the narrow interdental space. The scanbody has an optimized gingival part (emergence profile) for easy insertion into the implant....

LASAK CadCam bonded abutments (Ti base)

Individual types of scanbodies require the use of a corresponding library. In the next step, it will be possible to download the library for the combination of a specific type of abutment and scanbody. The library includes the LASAK CadCam bonded abutments (Ti base) of the BioniQ system. The libraries contain data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow). Select the type of scanbody     ...

Uni-Base titanium bonded bases &#8211; straight

LASAK BioniQ library for Uni-Base titanium bonded bases (Uni-Base), scanbody – SOLO The library contains Uni-Base titanium bonded bases (straight screw channels) for the BioniQ system. The library contains data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow). Use: The scanbody is intended for scanning a single tooth (solo work). The scanbody has ideal dimensions for precise scanning in the narrow interdental space. The scanbody has an optimized gingival part (emergence profile) for easy insertion into the implant....

LASAK CadCam bonded abutments (Ti base and Uni-Base)

Libraries of abutments for titanium bonded bases of the BioniQ system. The libraries are divided into the innovative Uni-Base titanium bases and the older type of LASAK CadCam titanium abutments (Ti base). The libraries contain data for both prosthetic platforms &#8211; BioniQ QR (blue) and BioniQ QN (yellow). Choose a product category   ...

One-piece (integral) connection

LASAK IMPLADENT library for One-piece (integral) connection The library includes data for milling direct (integral) abutments into the IMPLADENT system implant. The library contains data for both prosthetic platforms &#8211; IMPLADENT D2.9 (red) and D3.7 (green).    Current version V1.0.0    Library structure...

One-piece (integral) connection

LASAK IMPLADENT library for One-piece (integral) connection The library includes data for milling direct (integral) abutments into the IMPLADENT system implant. The library contains data for both prosthetic platforms &#8211; IMPLADENT D2.9 (red) and D3.7 (green). The library includes integral dummy conical connection for the IMPLADENT system. In order to execute the work, it is necessary to send the data via the 3Shape communicator to the LASAK milling center. &nbsp; &nbsp;    Current version V2.0.0    Library structure...

One-piece (integral) connection

LASAK IMPLADENT library for One-piece (integral) connection The library includes data for milling direct (integral) abutments into the IMPLADENT system implant. The library contains data for both prosthetic platforms &#8211; IMPLADENT D2.9 (red) and D3.7 (green). Unable to generate output as STL file. In order to execute the work, it is necessary to send the data via the 3Shape communicator to the LASAK milling center. &nbsp; &nbsp;    Current version V1.0.3    Library structure...

CAD libraries

The BioniQ libraries are available for the following software: 3Shape, Dental Wings and exocad. Every library for the chosen system contains files with data to download (ZIP). The BioniQ ZIP file (library) contains complete data, such as STL files for platforms (Q-Lock, Non-indexed, Bridge), Ti base (LASAK CadCam abutments), Screw-On abutments and STL files for Premill abutments. Furthermore, it contains the STL files for scanbodies and necessary configuration files (according to the system), if needed. All the data files need to be installed into the library of the modelling software in your computer or imported into your modelling software,...

LASAK CadCam bonded abutments (Ti base and Uni-Base)

Libraries of abutments for titanium bonded bases of the BioniQ system. The libraries are divided into the innovative Uni-Base titanium bases and the older type of LASAK CadCam titanium abutments (Ti base). The libraries contain data for both prosthetic platforms &#8211; BioniQ QR (blue) and BioniQ QN (yellow), including all types of scanbodies. Choose a product category   ...

One-piece (integral) connection

LASAK BioniQ library for One-piece (integral) connection The library contains integral connections for the BioniQ system. The library includes direct (integral) connection to implant for the BioniQ system. The library contains data for both prosthetic platforms &#8211; BioniQ QR (blue) and BioniQ QN (yellow), including all types of scanbodies. To complete the work, the data must be sent to the LASAK milling center.    Current version V1.0.0    Library structure...

Screw-retained restoration (Screw-On)

LASAK BioniQ library of abutments for screw-retained restoration (Screw-On), Screw-On scanbody The library contains abutments for screw-retained restoration (Screw-On BioniQ).    Current version V1.0.0    Library structure...

Dental Wings library

Libraries for Dental Wings contain data for LASAK BioniQ and LASAK IMPLADENT implant systems and all their prosthetic platforms. Select the type of implant system    Additional information   How to install the Dental Wings library...

Dental Wings library for BioniQ

Libraries for the LASAK BioniQ implantology system. The libraries contain data for both prosthetic platforms &#8211; BioniQ QR (blue) and BioniQ QN (yellow), including all types of scanbodies. Libraries can be downloaded for LASAK CadCam bonded abutments (Ti base and Uni-Base), One-piece (integral) connection and Screw-retained restoration (Screw-On). Choose a product category     ...

Dental Wings library for IMPLADENT

The libraries contain data for both prosthetic platforms &#8211; IMPLADENT D2.9 (red) and D3.7 (green). Libraries can be downloaded for LASAK CadCam bonded abutments (Ti base) and One-piece (integral) connection. Choose a product category   ...

One-piece (integral) connection

LASAK BioniQ library for One-piece (integral) connection The library contains integral connections for the BioniQ system. The library includes direct (integral) connection to implant for the BioniQ system. The library contains data for both prosthetic platforms &#8211; BioniQ QR (blue) and BioniQ QN (yellow), including all types of scanbodies. Unable to generate output as STL file. In order to complete the work, it is necessary to send it via 3Shape communicator to the LASAK milling center.    ...

Screw-retained restoration (Screw-On)

LASAK BioniQ library of abutments for screw-retained restoration (Screw-On), Screw-On scanbody The library contains abutments for screw-retained restoration (Screw-On BioniQ).    Current version V1.0.1    Library structure...

Premill abutments

LASAK BioniQ library for Premill abutments The library contains Premill abutments for the BioniQ system. The library includes data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow), including all types of scanbodies. Using NT-trading or Amann Girrbach holder.    Current version V1.0.1    Library structure...

3shape library for IMPLADENT

The libraries contain data for both prosthetic platforms &#8211; IMPLADENT D2.9 (red) and D3.7 (green). Libraries can be downloaded for LASAK CadCam bonded abutments (Ti base) and One-piece (integral) connection. Choose a product category   ...

3shape library

Libraries for 3shape contain data for LASAK BioniQ and LASAK IMPLADENT implant systems and all their prosthetic platforms. Select the type of implant system    Additional information   How to install the 3shape library...

3shape library for BioniQ

Libraries for the LASAK BioniQ implantology system. The libraries contain data for both prosthetic platforms &#8211; BioniQ QR (blue) and BioniQ QN (yellow), including all types of scanbodies. Libraries can be downloaded for LASAK CadCam bonded abutments (Ti base and Uni-Base), One-piece (integral) connection, Screw-retained restoration (Screw-On) and Premill abutments. Choose a product category     ...

Uni-Base titanium bonded bases &#8211; straight

LASAK BioniQ library for Uni-Base titanium bonded bases (Uni-Base), scanbody – narrow The library contains Uni-Base titanium bonded bases (straight screw channels) for the BioniQ system. The library contains data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow). Use: Designed for laboratory and intraoral scanning. Designed for scanbodies Ref. No.: BioniQ QR, indexed &#8211; narrow 2876.00 BioniQ QN,indexed &#8211; narrow 2877.00    Current version V1.0.1    Library structure...

Uni-Base titanium bonded bases &#8211; straight

Individual types of scanbodies require the use of a corresponding library. In the next step, it will be possible to download the library for the combination of a specific type of base and scanbody. The libraries contain data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow). The libraries include Uni-Base titanium bonded bases – straight screw channels for the BioniQ system. Select the type of scanbody      ...

Uni-Base titanium bonded bases – angled

LASAK BioniQ library for Uni-Base AN titanium bonded bases (Uni-Base AN), scanbody – narrow The library contains Uni-Base AN bonded titanium bases for angled screw channels for the BioniQ system. The library includes both BioniQ QR (blue) and BioniQ QN (yellow) prosthetic platform sizes. Use: Designed for laboratory and intraoral scanning. Designed for scanbodies Ref. No.: BioniQ QR, indexed &#8211; narrow 2876.00 BioniQ QN, indexed &#8211; narrow 2877.00    Current version V1.0.0    Library structure...

Uni-Base titanium bonded bases

The libraries are divided into Uni-Base &#8211; straight, which allows the production of a standard straight screw channel, Uni-Base AN &#8211; angled, with which it is possible to make angled screw channels and Uni-Base &#8211; shortened for manually shortened bases, so that your individual prosthetic work achieves the best possible aesthetic result. The libraries contain data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow). Choose a product category     ...

One-piece (integral) connection

LASAK BioniQ library for One-piece (integral) connection, scanbody &#8211; narrow The library contains data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow). The library includes integral dummies for the BioniQ system. To complete the work, the data must be sent to the LASAK milling center. Use: Designed for laboratory and intraoral scanning. Designed for scanbodies Ref. No. BioniQ QR, indexed &#8211; narrow 2876.00 BioniQ QN, indexed &#8211; narrow 2877.00    Current version V1.0.5    Library structure...

Screw-retained restoration (Screw-On)

LASAK BioniQ library of abutments for screw-retained restoration (Screw-On), Screw-On scanbody The library contains abutments for screw-retained restoration (Screw-On BioniQ).    Current version V1.1.0    Library structure...

Premill abutments

LASAK BioniQ library for Premill abutments, scanbody &#8211; SOLO The library contains Premill abutments for the BioniQ system. The library contains data for both prosthetic platforms – BioniQ QR (blue) and BioniQ QN (yellow). Compatible with NT-trading or Amann Girrbach holder. Use: Designed for laboratory and intraoral scanning. Designed for scanbodies Ref. No. BioniQ QR, indexed – SOLO 2881.00 BioniQ QN, indexed – SOLO 2882.00    Current version V1.0.1    Library structure...

3D print components

LASAK BioniQ library for 3D print components The library contains analogs data for the BioniQ system. The library contains data for both prosthetic platforms – BioniQ QR (blue), BioniQ QN (yellow) and data for BioniQ Screw-On. This library is required for creating 3D models in the Model Creator system.    Current version V1.8...

Exocad library for IMPLADENT

The libraries contain data for both prosthetic platforms &#8211; IMPLADENT D2.9 (red) and D3.7 (green). Libraries can be downloaded for LASAK CadCam bonded abutments (Ti base), One-piece (integral) connection and 3D print components. Choose a product category     ...

Exocad library for BioniQ

Libraries for the LASAK BioniQ implantology system. The libraries contain data for both prosthetic platforms &#8211; BioniQ QR (blue) and BioniQ QN (yellow), including all types of scanbodies. Libraries can be downloaded for LASAK CadCam bonded abutments (Ti base and Uni-Base), One-piece (integral) connection, Screw-retained restoration (Screw-On), Premill abutments and 3D print components. Choose a product category        ...

Exocad library

Libraries for exocad contain data for LASAK BioniQ and LASAK IMPLADENT implant systems and all their prosthetic platforms. Select the type of implant system    &nbsp;...

A look back at the last 25 years

Our LASAK Implantology Conference is perceived as being an international meeting place for practitioners in the fields of implantology and oral and maxillofacial surgery. This was the 25th time we have organised this event. It is a special occasion for us, where we can greet our clients personally and discuss things with them for which there is often no time in the hustle and bustle of everyday life. Our Managing Director Jakub Strnad looks back on the history of our implantology conference and at this year’s event in an interview with Ms Reichert from the prestigious German Implantologie Journal....

IMPLANTOLOGY Conference 2023

The 25<sup>th</sup> annual IMPLANTOLOGY 2023 conference, held on Friday, 21 April 2023, at the Cubex Centre in Prague, presented a number of interesting topics and lectures from leading experts from the Czech Republic and abroad. The conference was attended by over 100 visitors, who gained a great deal of new knowledge and experience in the field of implantology. &nbsp; The conference&#8217;s first speaker was Peter Brunzel, MBA from Dental Results, Germany, who focused on introducing the PrimeLOC system....

New: PrimeLOC attachments

Leveraging the most recognized overdenture attachment design globally, the PrimeLOC attachment system enables you to provide your patients with all the benefits of hybrid restorations without worrying about unnecessary costs or unsatisfactory durability. The PrimeLOC Overdenture Attachment System answers the increasing demand for value-optimized products without compromising quality. PrimeLOC attachments for hybrid restorations are now available at shop.lasak.com. &nbsp; Innovative coating technology The PrimeLOC abutments are coated with Zirconium Carbon Nitride. This tremendously hard, fully biocompatible ceramic PVD coating is very resistant to wear and abrasion....

Presentation of a novel two-phase dental implant concept at the 2022 International EAO Congress in Geneva.

The 29th EAO Congress (European Association for Osseointegration) took place in Geneva, Switzerland, from September 29 to October 1, 2022. We actively participated in this annual, highly prestigious dental implantology event through a poster presentation of a novel two-phase dental implant concept known as the “Connective Tissue Level Implant”. In the special issue of Clinical Oral Implants Research – the most cited oral implantology journal, an abstract of the presented study was published, where biological width is considered as a mucosal immunological system capable of ensuring the integrity of the internal environment,...

We are at IDS 2023 in Cologne

Learn more about our products and the latest news at our LASAK booth at IDS in Cologne (Germany), the world&#8217;s leading International Dental Show. Meet the LASAK team in person from March 14 to 18, 2023, at our stand, C-008, in hall 3.2. We regularly take part in the IDS (as in previous years) to meet you, our partners, in person and to present our new products to the international audience. This time, the focus is on our components for guided surgery that also enable treatment of edentulous jaw and the new PrimeLOC attachment system for overdenture restoration....

Date of the IMPLANTOLOGY Conference 2023 in Prague

We are pleased to invite you to the 25<sup>th</sup> annual LASAK IMPLANTOLOGY scientific conference. As in previous years, you can look forward to renowned international and national speakers sharing their experiences acquired in implantology practice. Please join us to celebrate 25 years of our traditional symposium with a lavish party featuring a banquet dinner complemented by interesting tastings. &nbsp; Date Friday, 21<sup>st</sup> April 2023 12–13 Registration 13–19 Agenda 19–22 Evening cocktail party During the event are provided refreshments....

New: Fully guided surgery for edentulous jaws

BioniQ fully guided surgery is also designed for the prosthetics-driven individual treatment of edentulous and partially edentulous jaws. This advanced solution allows the surgical template to be precisely anchored even in the most challenging anatomical conditions. &nbsp; What is needed In addition to the standard BioniQ surgical instrument set for fully guided surgery, only a few extra components are required. Reference pin for guided surgery Guided fixation pin Related Steco sleeve Updated libraries for planning software The reference pin for guided surgery plus accessories will ensure that the surgical template remains in a stable position during the entire surgical procedure,...

Computer-assisted surgical procedures with LASAK BioniQ implants

The goal of implantological treatment is to achieve a result which is functional and aesthetic, as well as long-term stable and sustainable. Based on his many years of experience with guided surgery as well as dynamic navigation, Dr Jiri Hrkal reports in his case study how current technologies, materials, procedures, and LASAK BioniQ implants help him to achieve this goal. In his article &#8220;Possible use of computer-assisted surgical procedures: Functional and aesthetic implantological treatments&#8220;, published in the prestigieous German Implantology Journal “Implantologie Journal No....

Temporary ProImplant implants available in the LASAK shop

LASAK one-piece ProImplant implants enable temporary treatment with an existing prosthesis or provisional fixed dentures during the healing period for extraction wounds, permanent implants, or graft sites. Your patients can leave your practice immediately after the implant placement with a functional prosthesis and continue to enjoy their lives without aesthetic and functional limitations and participate in social life during the required healing period. The temporary implants and the ProImplant instruments are now available in our LASAK shop....

IMPLANTOLOGY 2022

On Friday, 10 June 2022, the 24th traditional annual IMPLANTOLOGY seminar was held. Despite the conference&#8217;s initial misfortune of having to be postponed twice due to covid, we were finally able to welcome delegates to Prague&#8217;s Cubex Centre this year. &nbsp; Full programme of lectures Prof. MUDr. Antonín Šimůnek, CSc. and MUDr. Dana Kopecká, Ph.D. from the Department of Stomatology of the Faculty of Medicine at Charles University and Hradec Králové University Hospital, shared their experience and approaches to various indications stemming from 30 years of work in implantology....

Guided surgery

In the digital implantology, LASAK offers solutions and services for both pilot guided and fully guided surgery using the BioniQ implant system.

Updated IMPLADENT 2022 catalog

In connection with the discontinuation of IMPLADENT implants in 2020, the range of prosthetic and laboratory components and related instruments has also been revised. The core range of IMPLADENT prosthetic and laboratory components, together with the compatible instruments, will continue to be in stock for immediate delivery; the rest of the range will be available within three weeks from the order date. To order IMPLADENT products, please refer to the new IMPLADENT 2022 catalog, which is only available in digital form....

New: Surgical and protective gown Europa

Europa Surgical Gowns are certified under UNE EN 13795 &#8211; Meets quality requirements for operating theatres / clean rooms. &nbsp; Features of surgical gown Europa: Knitted collar (color according to size) Size variability thanks to snap buttons in the neck hem Sleeves are finished with seamless knitted cuffs Sewn-in waistband (inside and outside) Loose straight cut Reinforced seams High impermeability against fluids Durable and low-maintenance with an exceptionally long life &nbsp; New-generation surgical gown Europa with accredited quality guarantee: Technotex<sup>®</sup>....

New LASAK shop for bone regeneration

You can find our user-friendly online shop, especially for bone regeneration materials (bone grafts, membranes, and tacks), at the link shopboneregeneration.lasak.com. Our bone substitute materials are supplemented by high-quality products from proven industry partners. Other products are being gradually added. Visit our LASAK shop at the link shopboneregeneration.lasak.com to order the following products online: &nbsp; Fully resorbable bone substitute material PORESORB-TCP This cost-efficient completely resorbable bone graft by LASAK stimulates new bone formation, gradually dissolves and is replaced by newly formed bone tissue....

Electronic Instructions For Use (eIFU)

Selected LASAK products are now being supplied without printed Instructions For Use (IFU). Instead of unattractive, difficult-to-read, and non-user-friendly paper instructions, we have implemented the Electronic Instructions For Use (eIFU) system for you. &nbsp; Any time, without restrictions On the new ifu.lasak.com portal, you can easily search, view, download or print the current version of the IFU. Previous versions of these documents can also be accessed. At any time, without restrictions, all you need to obtain the IFU of a particular medical device is its reference number (REF)....

BioniQ 2022 Catalogue

The LASAK BioniQ catalogue for 2022 is out now. So, what can you find in there? We are continuously expanding the range of the BioniQ implant system according to the current trends, and your suggestions and requirements. Amongst other things, you will find the following new products: Uni-Base universal titanium bases The same base can be used for conventional and digital workflows as required. Bases marked AN allow for the construction of an angled shaft for the screw so that the screw access hole comes out in the ideal position in the crown....

We invite you to the IMPLANTOLOGY scientific conference

We invite you to the 24<sup>th</sup> IMPLANTOLOGY scientific conference annually held by LASAK. Also this year, you may look forward to renowned international and national speakers who will share their experiences acquired in implantology practice. Please join us to celebrate 30 years of the establishment of our company during an event party full of a lavish buffet dinner complemented by interesting tastings. &nbsp; Date Friday, 10<sup>th</sup> June 2022 11.45 – 13.00 Registration 13.00 – 19.20 Agenda 19.20 – 22.00 Evening cocktail party &nbsp;...

Experience with the BioniQ Guided Surgery

Nowadays, more and more implants are being placed at sites that would be considered as having insufficient bone volume for classical implantation procedures. If you want to implant in places with insufficient bone for classic implantation, there are several possibilities. Guided Surgery seems to be one of them, as Dr. Pavel Hyšpler, Head of Department of Stomatology of the Military University Hospital Prague, Czech Republic, reports in his case study in the prestigious German Implantology Journal “Implantologie Journal” No....

New: Uni-Base universal titanium bases

Uni-Base universal titanium bases allow the use of a fully digital CAD/CAM design and production process as well as conventional workflow. The Uni-Base AN bases allow the design of an angled screw channel and placing the screw access hole in the ideal position in the crown. Uni-Base bases have been developed with an optimized abutment shoulder respecting an optimized gingival emergence profile. The robust base design is optimized for milling processes. Strong retention elements ensure secure bonding and reliable fixation of the restoration....

Using narrow BioniQ Plus implants in elderly patients

The age profile of patients in dental practices is moving upwards. And patient expectations are also rising just as much. So exactly what questions does the implant dentist have to deal with, and how are our BioniQ Plus reduced-diameter implants of help? Dr Volker Bonatz M.Sc. answers all of these questions in a specialist article. This article can be found in the prestigious German Implantology Journal “Implantologie Journal No. 9/2021” under the title Implantate und Prothetik für den alternden Patienten (Implants and prosthetics for the ageing patient)....

Three-year prospective clinical and radiographic longitudinal study

The results presented in this study demonstrate the high success and predictability of two-stage BioniQ dental implants with a structured, bioactive, moderately rough BIO (MR) fixture neck surface. After three years in function, the mean marginal bone loss was 0.36 ± 0.57 mm and 0.13 ± 0.42 mm, taking implant and prosthesis placement baselines, respectively. Direct contact of connective tissue with the moderately rough BIO (MR) fixture neck surface during supracrestal and equicrestal insertion prevents marginal bone resorption during biologic width restoration in patients with thin and thick gingival biotype....

IDS in Cologne 2021

LASAK is taking part in the world&#8217;s leading trade fair for the dental industry &#8211; the International Dental Show &#8211; in Cologne, from 22nd &#8211; 25th September 2021. This will give us a fantastic opportunity to present our very latest products to an international audience. The focus is on the instruments for fully guided surgery and guided pilot drilling as well as the universal Uni-Base titanium bases, which offer prosthetically oriented implant restoration with maximum flexibility and efficiency....

Welcome to LASAK shop

Please, choose your country or if you can´t find it, contact us: order@lasak.cz   &nbsp; Austria Belgium Bulgaria Croatia Implantology Implantology Implantology Implantology Bone regeneration Bone regeneration Bone regeneration Bone regeneration &nbsp; &nbsp; Cyprus Denmark Estonia Finland Implantology Implantology Implantology Implantology Bone regeneration Bone regeneration Bone regeneration Bone regeneration &nbsp; &nbsp; Germany Greece Hungary Ireland Implantology Implantology Implantology Implantology Bone regeneration Bone regeneration Bone regeneration Bone regeneration &nbsp; &nbsp; Italy Latvia Lithuania Luxembourg Implantology Implantology Implantology Implantology Bone regeneration Bone regeneration Bone regeneration Bone regeneration &nbsp;...

Finding the right implant prosthetics for long-term success

Elderly patients usually want to enjoy their food without discomfort while being treated minimally invasively. They often have only a limited budget for their treatment, too. Dr. Volker Bonatz M.Sc., M.Sc. is well aware of this. He is, however, able to fulfil his patients’ high expectations by using our BioniQ implants, together with PORESORB-TCP bone graft. The original clinical case report, “Richtige Implantatprothetik für langfristigen Erfolg”, in German was published in the prestigious German Implantology Journal,...

LASAK peace of mind lifetime guarantee

Precise control Before leaving our production plant in Mnichovo Hradiště, each of our products goes through a careful multi-level inspection using top brand measuring devices. All LASAK products are manufactured exclusively by our highly qualified employees. &nbsp; &nbsp; Quality guarantee We stand 100% behind the quality of our products. That&#8217;s why you have a lifetime guarantee from us on LASAK dental implants. We guarantee that, in the case of a loss or failure of an inserted LASAK implant we will replace the implant free of charge,...

Effective bone regeneration and wound healing with LASAK products

As one of the very few implant manufacturers, LASAK not only manufactures its implants but also the bone grafts in its own production facility. For the treatment of bone defects, LASAK provides bone substitute materials that represent a valuable alternative to autologous bone. They provide a stable scaffold for new bone formation. Both materials for bone grafting from LASAK have no risk of immunological reactions or infection transmission and have human-like bone structure. The fully resorbable bone substitute,...

IMPLANTOLOGY conference 2021 – CANCELED

We invite you to the 24<sup>th</sup> IMPLANTOLOGY scientific conference annually held by LASAK. Also this year, you may look forward to renowned international and national speakers who will share their experiences acquired in implantology practice. Please join us to celebrate 30 years of the establishment of our company during an event party full of a lavish buffet dinner complemented by interesting tastings. &nbsp; We are very sorry to inform you that we have had to cancel the IMPLANTOLOGY 2021 conference because of the unfavorable development of the coronavirus COVID-19 pandemic....

Screw-On abutment holder

You may have noticed that there is something extra in the package of angled Screw-On abutments. In all packages of angled Screw-On abutments there is a newly included titanium abutment holder. The titanium Screw-On abutment holder allows easier transport of the abutment into the patient&#8217;s mouth and safer handling, especially in the upper jaw. The holder can also be used to better determine the orientation of the Screw-On bridge screw axis. For your maximum convenience, the holder is delivered already screwed onto the abutment....

Pre-Christmas season

Dear customers, We would like to draw your attention to the fact that delivery companies may deliver parcels with some delay, in November and December, because of the busy pre-Christmas period. Usually, guaranteed delivery by noon next day is not available at all during the last two weeks before Christmas Eve. We are sorry but we have no control over parcels being delivered in time. Please, take this into account when planning your orders and place your orders well in advance to ensure timely delivery....

BioniQ 2020 Catalogue

In addition to the standard products and those with which you are already familiar, you will find a range of new products in our catalogue, including: Gingiva formers – extra wide, Gingiva formers – individual, Screw-On temporary coping (individually or in a set of 5 pieces), Screw-On Ti base (individually or in a set of 5 pieces), Instruments for fully guided surgery, ProImplant system. &nbsp; All you need to do is to download the electronic version....

IMPLANTOLOGY conference 2020 – canceled

We invite you to the 24<sup>th</sup> IMPLANTOLOGY scientific conference annually held by LASAK. Also this year, you may look forward to renowned international and national speakers who will share their experiences acquired in implantology practice. In addition to lecturers whom you met last year, there will be new ones as well. We are sure that you will enjoy the evening party with a lavish buffet dinner. &nbsp; We are sorry to inform you,...

Superior experience of BioniQ implant users confirmed by clinical study

The success rate of LASAK products is monitored in the long-term and – most importantly – is documented in clinical studies published in scientific literature. Another study supporting the high quality of LASAK products has been released. The paper was published in the American Journal JOMI 2019; 34(5):1184–1194. LASAK offers original solutions based on its own research and development. LASAK documents the functional characteristics of BioniQ implants with rigorously controlled and evaluated efficiency in clinical practice....

Presentation of the Excellent Clinical Results of BioniQ Implants at the EAO 2019 International Congress in Lisbon

The last weekend of September set the stage for the European Association for Osseointegration (EAO) international congress in the Portuguese capital, Lisbon. The outstanding long-term results of the BioniQ implant system were presented at the congress once again, this year. An abstract of the presented work which, among other things, evaluated the impact of BioniQ implant insertion depth during implantation was also published in a special issue of the most prestigious implantology journal, Clinical Oral Implants Research....

Implants IMPLADENT will be discontinued

We would like to inform you that the production of IMPLADENT implants will be discontinued on December 31<sup>st</sup> 2019. Availability of all types of IMPLADENT implants will not be guaranteed from this date on and only the final sale of implants will take place. The complete range of prosthetic and laboratory components, together with the compatible IMPLADENT instruments, will be available for prosthetic series 2.9, 3.7, and 5.0. The IMPLADENT system was launched onto the market in 1993,...

Update: Narrow scanbodies in CAD libraries

Narrow scanbodies have been added to the libraries for the BioniQ system, both for the blue QR prosthetic platform and for the yellow QN prosthetic platform. The new scanbodies have optimised features, meaning they can be used with intraoral scanners and in laboratories. Smaller dimensions, identical scanning accuracy The scanbody – narrow has been developed due to the growing popularity of intraoral scanning and the related need for a more anatomically suitable scanbody shape. The scanbodies are generally smaller in dimension;...

New innovative Screw-On open tray impression coping

The new Screw-On open tray impression coping has a new optimized shape for better dual use. The Screw-On open tray impression coping is made of titanium and can also be used as a base for anchoring a temporary restoration after removing the fastening pin. The new impression coping version has a reduced external diameter of the body. It can be shortened, which makes anchoring smaller-sized temporary restorations easier and offers more flexibility when designing the restoration....

Effect of abutment height and implant depth position on peri‐implant bone loss

The success rate of LASAK products has been documented over many years and, most importantly, documented in studies published in scientific literature. We are pleased to announce that a new study has been published to demonstrate the high quality of LASAK products. &nbsp; LASAK sponsored a clinical study comparing the influence of abutment height and implant depth position on interproximal peri‐implant bone in sites with thin mucosa. The study was carried out by the team of Dr Alexandre Pico and Prof Juan Blanco-Carrión....

IMPLANTOLOGY 2019

Held on Thursday 11 April 2019, at the Clarion Congress Hotel, Prague, the IMPLANTOLOGY 2019 Conference, the 23<sup>rd</sup> consecutive event of this type, featured a full agenda, packed with, and inspired by, the latest updates from throughout the industry. As a long-term partner of implantology specialists, whether based in this country or elsewhere, we are fully aware that this sector continues to move forward, making regular learning and training an important and essential part of professional dentistry....

Resorbable collagen membrane for effective wound healing

LASAK launches a highly effective Collagene AT<sup>®</sup> barrier membrane for guided tissue regeneration. It is used primarily together with a bone substitute material, such as OssaBase-HA and / or PORESORB-TCP. This collagen membrane is naturally resorbed, typically within 180 days, eliminating a second operation for its removal. The Collagene AT<sup>®</sup> membrane is made of pure lyophilized hypoallergenic collagen of equine extraction. Collagene AT<sup>®</sup> is a membrane with nanometric micro-irregularities at the surface that creates a barrier effect....

BioniQ Plus implant

LASAK has extended its BioniQ implant system with BioniQ Plus implants with a machined collar, which are intended to be inserted, primarily, into the distal area.

IDS in Cologne 2019

LASAK will take part in the world’s leading trade fair for the dental sector – the International Dental Show in Cologne, Germany, on 12–16 March 2019. The company will be announcing to international audience new addition to its product portfolio – the titanium BioniQ Plus implant with a machined collar and a hydrophilic bioactive surface. &nbsp; &nbsp; IDS 2019 in Cologne is the world’s leading trade fair for the dental sector. It´s a meeting place for decision-makers from dental practices,...

BioniQ 2019 Catalogue

If you haven’t found the new print issue of the LASAK BioniQ 2019 catalogue in your post box, don’t worry. Just tell us and we will immediately send one to you, free of charge. Have you been waiting too long for the postman? All you need to do is to download the electronic version. In addition to the standard products and those with which you are already familiar, you will find a range of new products in our catalogue,...

Video IV LASAK IBERIA CLINICAL &#038; SCIENTIFIC UPDATE

Last 9<sup>th</sup> of November LASAK IBERIA celebrated the 4th edition of its traditional LASAK IBERIA CLINICAL &amp; SCIENTIFIC UPDATE. Besides up to date medical and scientific topics, in this edition, the topic “Mangament and Marketing Applied to Dental Office“ was also included. From LASAK IBERIA we wish to thank both participants and speakers the warm appraisal of the event. &nbsp;...

The new BioniQ Plus implant

Supplementation of the BioniQ implant system with new BioniQ Plus implants with a machined collar gave rise to a comprehensive dental implant system capable of providing treatment in every situation. It includes BioniQ implants inserted at the level of the bone and BioniQ Plus implants allowing insertion at the level of soft tissue. In both cases, starting with a diameter as small as 2.9 mm. All implants are fitted with a unique hydrophilic BIO-surface. Ideal implant for problematic conditions The BioniQ Plus implant is a one-stage implant intended to be inserted primarily into the distal area....

Privacy Policy

Introduction The protection and security of personal data are of paramount importance to LASAK s.r.o., VAT No.: CZ44265786. We collect and process personal data in compliance with applicable data protection and privacy laws and regulations, including the GDPR (EU Data Protection Regulations). It is important for us that you know which personal data are collected when you visit our website and when you make use of our services or offers. We also want you to be aware of how we subsequently use this data....

IMPLANTOLOGY conference 2019

We invite you to the 23<sup>rd</sup> IMPLANTOLOGY scientific conference annually held by LASAK. Also this year, you may look forward to renowned international and national speakers who will share their experiences acquired in implantology practice. In addition to lecturers whom you met last year, there will be new ones as well. For example, renowned Spanish lecturer Prof. Juan Blanco-Carrión, whose lecture will be devoted to managing the factors for peri-implant crestal bone preservation....

LASAK conference IMPLANTOLOGY 2018 video report

The 22<sup>nd</sup> IMPLANTOLOGY conference took place, in Prague, on Friday, 6<sup>th</sup> April 2018. Nearly 200 dental implantologists from the Czech Republic and abroad took part in the event. This year, six Czech lecturers and one foreign shared their experience. &nbsp; Long version (5:08) &nbsp; Short version (1:29)...

Effective digital solutions

In accordance with our “Simplicity and Effectiveness” philosophy, we continue to develop and expand our services. You can plan your treatment with LASAK components using your planning software and you can also order LASAK CadCam milled frameworks using our online application and check your order’s status anytime, even at weekends and evenings. So, no more filling out paper order forms. You can digitize your work, simply and effectively at www.lasak.com. &nbsp; Supported planning software BioniQ implant libraries for the planning of surgical treatment are available for the following planning software: Implant Studio&#x2122;...

LASAK conference IMPLANTOLOGY 2018

The 22<sup>nd</sup> IMPLANTOLOGY conference took place, in Prague, on Friday, 6<sup>th</sup> April 2018. Nearly 200 dental implantologists from the Czech Republic and abroad took part in the event. This year, six Czech lecturers and one foreign shared their experience. It has become a tradition that the professional programme of the seminar is opened with a short speech by Ing. Jakub Strnad, PhD, CEO of LASAK. His speech was followed by the first lecture,...

In Vitro Bioactivity Test of Real Dental Implants According to ISO 23317

The success rate of LASAK products has been documented over many years and, most importantly, documented in studies published in scientific literature. We are pleased to announce that another new study has been published which demonstrates the high quality of LASAK products. This article was accepted for publication in JOMI, Vol. 32, No 6, 2017. The study compares in vitro bioactivity in simulated body fluid of commercially available dental implants with various surface modifications (BIO-surface, SLA,...

Effect of abutment height on interproximal implant bone level

The success rate of LASAK products has been documented over many years and, most importantly, documented in studies published in scientific literature. We are pleased to announce that a new study has been published to demonstrate the high quality of LASAK products. LASAK sponsored a clinical study comparing the effect of abutment height on interproximal implant bone level in the early healing phase. The study was carried out by the team of Professor Juan Blanco. The article was accepted for publication in the Clinical Oral Implants Research journal,...

IMPLANTOLOGY conference 2018

LASAK scientific conference As usually, the beginning of April will belong to the IMPLANTOLOGY scientific conference. The 22<sup>nd</sup> annual conference will offer a variety of interesting topics covered by international and national speakers. Agurne Uribarri, DDS, PhD from Spain will share with you her rich implantology experience. The leading Czech expert in implantology prof. Antonin Simunek, MD, PhD will, based on his vast experience, together with Dana Kopecka, MD, PhD introduce the most common mistakes in implantology....

III LASAK IBERIA CLINICAL &#038; SCIENTIFIC UPDATE

LASAK IBERIA is organizing the third Clinical &amp; Scientific Update on Friday, 10<sup>th</sup> November 2017 at Deusto University in Bilbao, Spain. The symposium will be moderated by Dr. Arturo Bilbao and features seven highly-renowned experts in periodontology, oral and maxillofacial surgery, and implantology sharing their experience with the audience. The program ends with a lecture illustrating the rapid innovations and adaptation challenges faced by those in the highly demanding world of professional sports....

New design of the LASAK website

We have redesigned the LASAK website. Its appearance and structure are designed for maximum clarity, reliability and ease of use, even on smartphones or tablets. In addition to this new design, the existing sections have been expanded with some added quite recently. CAD/CAM frameworks on-line The LASAK CadCam section contains all the necessary information about LASAK CadCam technology – a unique production system of precise frameworks which allow direct fixation of dental implants without the use of abutments or other connecting elements....

New generation of BioniQ drills

BioniQ<sup>®</sup> drills stand out for their efficient performance, resistance and simplicity of use. The innovative BioniQ<sup>®</sup> drills have been designed to be used either in the traditional way, or with drill stops for even more comfort and safety. You will achieve the required depth easily and with precision, without having to worry about overdrilling. The drills are available in two lengths – 34 and 40 mm. &nbsp; One drill stop set for all implant types We have made the use of drill stops as easy as possible....

News about the BioniQ system

Your happiness is important for us. Therefore, we are constantly expanding the BioniQ implant system product range. This year’s summary of new products can be found in the Product catalog supplement 2017. See below for information on some of the new products. Temporary abutments for the yellow prosthetic platform QN are available indexed or non-indexed, in two gingival heights. A non-indexed temporary abutment, with an internal conical connection has been added to the indexed version of the blue prosthetic platform QR....

Home page

FOR PROFESSIONALS FOR PATIENTS Our mission We develop and manufacture dental implants and materials for bone regeneration, which we sell in the Czech Republic and 20 other countries. We contribute to the development of modern dental implantology to improve people´s health and quality of life with the benefits of our top products....

IMPLANTOLOGY conference 2017

The 21<sup>st</sup> annual IMPLANTOLOGY conference 2017 took place at the Prague Clarion Congress Hotel on Friday 7<sup>th</sup> April 2017. Almost 200 dentists and technicians attended its programme packed with interesting lectures followed by an exquisite molecular gastronomy show. The conference was opened by Jakub Strnad, PhD, CEO of LASAK, and prof. Jiri Mazanek, MD, DrSc., who appreciated their long-term co-operation and emphasised the progress achieved by LASAK over more than 25 years of its presence on the market....

Videos

LASAK corporate video In this video you will not only learn about the actual production but also the entire manufacturing process – how our products pass from the developers to production and quality control, and on to their delivery from the warehouse to their final destination. Long version (5:30) Short version (3:30) Advantages of BioniQ<sup>®</sup> system The philosophy behind the system emphasizes simplicity and effectiveness. The BioniQ<sup>®</sup> implant system offers high-quality treatment at a reasonable cost....

Studies

Implantology Clinical and experimental studies. Bone regeneration Clinical and experimental studies. Spondylosurgery Clinical and experimental studies....

Frequently asked questions

How have teeth been replaced to date? To date, many patients have been used to traditional dental bridges and dentures. Both methods help people, but they also have considerable disadvantages. A bridge (as implied by its name) bridges the gap between teeth. And just like a bridge, it needs two firm supporting abutments. To build them, two healthy and fully functional teeth must be used. They are irreversibly damaged by grinding and can no longer fulfil their original function....

Tooth replacement options

The most common methods of treating lost teeth are dental bridges and dentures, which can help to a certain extent, but both methods also have considerable disadvantages. Bridge A bridge needs two firm supports. To build them, two healthy and fully functional teeth, that are irreversibly damaged by grinding and can no longer fulfil their original function, must be used. Total tooth replacement Over time, a denture will fit less and less well. In some patients,...

Patient stories

&nbsp; “I definitely wouldn&#8217;t have made any other choice.” Nada, customer service “There has always been a missing tooth on each side of my mouth. Not only were the empty holes unsightly, but the neighboring teeth also had a tendency to fill those empty spaces, which led to malformations. Besides implants, my dentist suggested bridges, although he warned me that the procedure would be very complicated and would require invasive grinding of the healthy neighboring teeth....

Taking care of dental implants

You have had a dental implant inserted. This treatment does not cause great stress on your body. Nevertheless, it is essential to cooperate with your dentist and to follow to their instructions.  Postoperative recommendations Local anaesthetics do not affect your ability to drive. However, we recommend that someone accompanies you. This is essential if you undergo a general anaesthetic. You can drink shortly after the implantation. Cold drinks help to relieve any pain and swelling. To reduce bleeding,...

Contact us

Headquarters in Prague Our research and development center for innovatations in dental implantology and tissue regeneration is located here. The management of the company, together with our commercial, logistics, and marketing departments, is based here too. Receipt of orders and customer service Mon–Fri, 8 a.m.–4.30 p.m. LASAK s.r.o. Ceskobrodska 1047/46 Hloubetin 190 00 Prague 9 Czech Republic GPS: 50°5´35,631&#8243;N, 14°31´33,078&#8243;E Tel.: +420 224 315 663 Fax: +420 224 319 716 E-mail: order@lasak.cz &nbsp; &nbsp; Billing information: LASAK s.r.o....

IDS in Cologne 2017

LASAK will take part in the world’s leading trade fair for the dental sector – the International Dental Show in Cologne, Germany, on 21–25 March 2017. The company will be announcing to international audience some new additions to its product portfolio – the narrow titanium BioniQ<sup>®</sup> S2.9 implant with a hydrophilic bioactive surface and OssaBase-HA, its innovative, nanoporous material for bone regeneration. IDS 2017 in Cologne is the world’s leading trade fair for the dental sector....

IMPLANTOLOGY conference 2017

LASAK scientific conference The LASAK company is going to organize the 21<sup>st</sup> annual scientific implantology conference. Dr. Curd Bollen, the Dutch implantologist, will share with the audience his rich implantology experience during the afternoon program. He will focus on the very wide problem of halitosis, which is common not only in connection with dental implants. No less interesting will be the lecture of the Spanish lecturer, Pelayo Antuña Valle DDS, about soft tissue management in implant prosthodontics....

LASAK BioniQ surgical procedure video

We are publishing a video showing the surgical procedure for the LASAK BioniQ<sup>®</sup> implant system on our corporate YouTube channel. The video presents a single tooth implantation. The surgical treatment is accompanied by pictures of the instruments used and the instructions for their use. The video specifically shows the procedure for the implantation of the LASAK BioniQ<sup>®</sup> implant S3.5. The basics of the prosthetic treatment, including impression taking and the installation of the temporary and final superstructures form the second part of the video....

History of the LASAK company

As part of its 25th anniversary, the LASAK company has launched a new section of its website – a time axis covering the company`s history since its foundation in 1991 to the present. The time axis illustrates the company&#8217;s important milestones, accompanied by a description and photographs, such as photographs of the two founders, glass ceramic materials and implants, photographs of IMPLADENT VHAO and SHAO dental implants (predecessors of the currently produced implants with the BIO-surface),...

Invitation to LASAK IBERIA symposium

LASAK´s partner in the Iberian market, LASAK IBERIA, is organizing the second Clinical &amp; Scientific Update on Friday 18th November 2016 at Deusto University in Bilbao, Spain. Seven highly renowned experts in periodontology, oral and maxillofacial surgery, and implantology will share their experience with the audience. The moderator of the symposium is Dr. Carlos Aparicio MD, DDS, MSc, MSc, DLT, PhD, from Barcelona (Spain). He created the first center focused exclusively on implant-supported dental rehabilitation in the maxilla....

New BioniQ implant carrier offers improved safety

A team of LASAK experts has made a great effort to enhance the BioniQ<sup>®</sup> implant carrier with only one aim – to increase the safety and reliability of the implant system. The new implant carrier has been developed in such a way that damage to the implant‘s inner configuration or injury to the surrounding tissues during the implant insertion is avoided as much as possible. Protection of the inner structural elements of the implant ensures correct fixation of the restoration into the implant,...

Implantology course for Taiwanese partner

Implantologists cooperating with LASAK’s Taiwanese distributor, received implantology training during May 24<sup>th</sup> and 26<sup>th</sup>, to help them to move from the LASAK IMPLADENT system to its BioniQ<sup>®</sup> system. The participants spent the first two days in Hradec Kralove in an intership at the Centre for Dental Implantology of the Department of Dentistry at Charles University in Prague’s Faculty of Medicine. On the third day, a course was held at the Research and Development Centre for Dental Implantology and Tissue Regeneration in Prague-Hloubetin....

LASAK corporate video

As part of the LASAK´s 25th anniversary celebrations, we would like to present to you our new corporate video. Do you wonder how our products are manufactured, what our buildings look like, and what has to happen before our products come to you? You find the answers in this video. Please, give us five minutes to see what is behind our Czech company´s international business success and world-class product excellence....

BioniQ S2.9 narrow implants

LASAK adds narrow S2.9 implants and a new QN prosthetic platform to the BioniQ<sup>®</sup> implant system.

LASAK celebrates 25th anniversary with its customers

The LASAK company celebrated its 25th anniversary during the annual IMPLANTOLOGY conference on Friday, 15th April 2016, at Prague Castle. Over 200 dentists and dental technicians from the Czech Republic and abroad gathered in the Lobkowicz Palace to commemorate this significant occasion. The scientific part of the programme – in which six presenters shared and presented their experience from implantology practice – was followed by a celebratory cocktail party. The 25th anniversary of its foundation is a notable event for the Czech company,...

BioniQ S2.9 – narrow hydrophilic titanium implant

The LASAK company has extended its BioniQ<sup>®</sup> implant system with a new line of narrow implants with a diameter of 2.9 mm. This enables the BioniQ<sup>®</sup> system to offer optimal solutions in situations where treatment with conventional dental implants is either problematic or completely impossible; most frequently in the anterior area with a narrow alveolar ridge or when interdental space is limited. LASAK company was one of the first companies to launch narrow implants as part of its IMPLADENT implant system in 1996....

LASAK celebrates 25-year anniversary

In 2016, LASAK is celebrating the 25<sup>th</sup> anniversary of our founding. As part of this significant milestone, we have organized a number of gifts and events. Please join us in celebrating 25 years of our Czech company´s international business success and world-class product excellence.From April you will be able to see how our products are made in a new video that will be available on our website and YouTube. You will not only learn about the actual production but also the entire manufacturing process – how our products pass from the developers to production and quality control,...

Massive response to LASAK IBERIA symposium

Coinciding with LASAK IBERIA´s first year of activity in Spain and Portugal, the first LASAK IBERIA Clinical &amp; Scientific Update took place on Friday 13 November 2015 at the Iberdrola Tower in Bilbao, Spain. The speakers focused on clinical cases in the fields of dental surgery, periodontics and prosthodontics. The symposium gave a comprehensive view of current trends in dental implantology. The interesting program and speakers attracted more than 220 dentist professionals. They met to discuss the latest news and share their clinical experiences....

IMPLANTOLOGY 2016

20 years of LASAK scientific conferences In 2016, LASAK is going to organize its 20<sup>th</sup> annual IMPLANTOLOGY conference. The leading Spanish oral and maxillofacial surgeon, Arturo Bilbao Alonso, MD, PhD, PhD, will share his more than 20 years of experience from combining clinical practice with teaching at the University of Santiago de Compostela. Prof. Antonin Simunek, MD, PhD, from the Implantology Centre in Hradec Kralove, who is regarded as one of the pioneers of modern implantology in the Czech Republic,...

Successful reception of BioniQ in Spain

LASAK IBERIA, our partner in the Iberian peninsula, launched our BioniQ<sup>®</sup> implant system in November 2014 in the Iberian market. “The implementation of the LASAK IBERIA project is exceeding our best expectations,” said Mr. Juan Seijo, the Commercial Director of LASAK IBERIA, in an interview for Gaceta Dental, one of the most popular Spanish dental magazines. LASAK IBERIA decided to build its business on the high technological and scientific foundation which the LASAK company with its nearly 25-years´ history provides....

BioniQ – treatment procedure video

This video shows the procedure for, first, the surgical and then the prosthetic treatment with the BioniQ<sup>®</sup> implant system. At the beginning of the video, prof. Antonin Simunek, M.D. demonstrates the insertion of the LASAK BioniQ<sup>®</sup> implant, BIO S3.5/L16. This is followed by the prosthetic treatment performed by Dita Dufkova, M.D. Both are members of the prestigous Center of Dental Implantology in Hradec Kralove, CZ. The video shows the steb-by-step procedure with the LASAK BioniQ<sup>®</sup> implant system....

Looking back at IMPLANTOLOGY conference 2015

More than two hundred dentists and dental technicians participated in the 19th scientific conference IMPLANTOLOGY 2015, organized annually by LASAK. The central theme of the presentations was &#8220;Dental implantology: ease and efficiency&#8221;. On Friday, April 17 2015, implantologists not only from the Czech Republic, but also from other European countries, gathered in Prague to listen to speakers and to discuss current issues from their everyday dental practice. Dana Kopecka, M.D. from the University Hospital in Hradec Kralove,...

European Commission Vice-President visits Development Centre

The European Commission Vice-president for Jobs, Growth, Investment and Competitiveness, Jyrki Katainen, visited the Research and Development Centre of Dental Implantology and Tissue Regeneration of LASAK in Prague as part of his program to promote the European investment plan (the so-called “Junker´s Package”). The centre is one of the successful projects co-financed by the European Fund. Accompanying him on the visit was the Czech Minister of Regional Development, Karla Slechtova. The head of the centre, Mr....

Program of IMPLANTOLOGY conference 2015

LASAK conference – dental implantology: ease and efficiency The key topics of the 19th annual scientific conference, IMPLANTOLOGY 2015, are simplicity and efficiency in dental implantology and modern trends of prosthetic treatment. The speakers present, among other topics, their experience with the new BioniQ<sup>®</sup> implant system. Venue Friday, 17 April 2015, Clarion Congress Hotel Prague, Freyova 33, Prague 9, Czech Republic. How to get to the hotel is described on hotel website. Program of the conference 8.30–9.00 Registration 9.10–9.30 Kopecka D.,...

IDS in Cologne 2015

LASAK will take part in the world’s leading trade fair for the dental sector – the International Dental Show in Cologne, Germany on 10–14 March 2015. The company will be introducing to the international audience its new advantageous, cost-effective BioniQ<sup>®</sup> implant system and OssaBase-HA its innovative, nanoporous material for bone regeneration. IDS 2015 in Cologne is the world’s leading trade fair for the dental sector. It´s a meeting place for decision-makers from dental practices,...

Official presentation of LASAK IBERIA

The BioniQ<sup>®</sup> implant system was launched in the Iberian market on 14 November 2014 in Bilbao (Spain) at Iberdrola Tower. The cooperation between the Spanish partner TH Medical and the Czech manufacturer LASAK was presented under the brand LASAK IBERIA. The knowledge of the Spanish and Portuguese markets in connection with more than 20 years of experience in dental implantology is the best prerequisite for a long-term and successful cooperation and the best service for the customers....

Termín IMPLANTOLOGIE 2015

LASAK seminář – jednoduchost a efektivita v dentální implantologii Nosnými tématy již 19. ročníku odborného semináře IMPLANTOLOGIE budou jednoduchost a efektivita v dentální implantologii a moderní trendy protetického ošetření. Přednášející budou prezentovat mimo jiné také své zkušenosti s novým systémem BioniQ<sup>®</sup>. Seminář se uskuteční v pátek 17. dubna 2015 v Clarion Congress Hotelu Prague. Přednášející: Jan Dražan, Kai Fischer (Německo, přednáška v EN), Tomáš Hudler, Dana Kopecká, Antonín Šimůnek, Vladimír Zábrodský a další....

BioniQ na ICOI South Asia

LASAK ve spolupráci se svým indickým partnerem představil v jižní Asii implantační systém BioniQ<sup>®</sup>. V rámci odborné implantologické konference ICOI South Asia, která se konala v indickém Hyderabáru, byl představen nový úspěšný systém dentálních implantátů BioniQ<sup>®</sup>. Na konferenci s více než šesty sty účastníky vystoupil spolu s Prof. MUDr. Antonínem Šimůnkem, CSc., z Lékařské fakulty UK v Hradci Králové také Dr. Christian Berger, prezident BDIZ EDI, a Prof....

LASAK Iberia starts in November

LASAK Iberia, through its partnership with TH Medical, launches its new BioniQ<sup>®</sup> implant range in the Spanish and Portuguese markets on 1 November 2014. Biomaterials, neurosurgery and traumatology lines will also be available in the Iberian market. The official product presentation will take place on 14 November 2014 in Bilbao at Iberdrola Tower. For further information please contact us at info@thmedical.es. For more information about TH Medical and the product portfolio for Iberian market see www.thmedical.es....

Veletrh Pragodent 2014

Také letos se budeme již tradičně účastnit veletrhu Pragodent, jehož brány budou pro návštěvníky otevřeny od 9. do 11. října 2014. Přijďte nás navštívit na stánek č. 102 ve střední hale Průmyslového paláce v Praze-Holešovicích a seznámit se s novinkami, které jsme si pro vás letos připravili. Součástí dentálního veletrhu bude odborný doprovodný program Dental Summit Prague. Více na www.pragodent.eu. Těšíme se na setkání! &nbsp;...

Testing of fatigue strength – Astra EV vs. BioniQ

LASAK company added the next item to fatigue strength of the implant-abutment connection tests (ISO 14801). Astra OsseoSpeed™ EV 3.6S implant, new on the market, failed stength test by load 180 N. Level of strength is about 25 % less than BioniQ<sup>®</sup> S3.5 implant, which resisted load 240 N. Comparations to the other commercial implant systems is in the graph bellow. More implant-abutment test information is on Q-Lock connection page. Sources: M. Wieland,...

Indian distributor&#8217;s training

A training course was underway on 23 and 24 April 2014, this involving partners of LASAK´s Indian distributor. The first day underwent the dentists an internship at the Implantology Centre of the Dental Clinic, Charles University´s Faculty of Medicine and University Hospital, Hradec Kralove, while on the following day was held the session at the Research and Development Center for Dental Implantology and Tissue Regeneration, Prague – Hloubetin. The Implantology Centre in Hradec Kralove, a facility with more than 20-year experience,...

Ohlédnutí za seminářem IMPLANTOLOGIE 2014

Dne 4. dubna 2014 proběhl již osmnáctý ročník implantologického semináře IMPLANTOLOGIE 2014. Zúčastnilo se ho téměř dvě stě zubních lékařů a techniků z České republiky i zahraničí, kteří se zabývají implantologií. Seminář již tradičně zahájil Ing. Jakub Strnad, Ph.D., ředitel společnosti LASAK, na něhož navázal prof. MUDr. Jiří Mazánek, DrSc., předsedající prvnímu bloku přednášek. Úvodní přednáška MUDr. Dany Kopecké, Ph.D., z FN v Hradci Králové pojednávala na základě dlouhodobých zkušeností o praktickém posuzování nabídky kosti vhodné k zavedení implantátů,...

Seminář již tento pátek v Praze!

Osmnáctý ročník odborného semináře IMPLANTOLOGIE, pořádaného společností LASAK, se uskuteční již tento pátek 4. dubna 2014 v Clarion Congress Hotelu Prague, ul. Freyova 33, Praha-Vysočany. Pozvání přijal také významný nizozemský implantolog Dr. Curd M. L. Bollen, DDS, PhD, MSc perio. Dr. Bollen je předním nizozemským odborníkem v oblasti implantologie a parodontologie. Prestižní privátní praxi provozuje v Nizozemí a Belgii. Je autorem nebo spoluautorem více než padesáti odborných publikací, zaměřených na parodontologii a implantologii. Jeho přednášky vycházejí z každodenní praxe a jsou i prakticky a moderně zaměřeny....

IMPLANTOLOGIE 2014

18. ročník implantologického semináře Odborný seminář IMPLANTOLOGIE pořádá společnost LASAK již osmnáctý rok. Uskuteční se v pátek 4. dubna 2014 v Clarion Congress Hotelu Prague. Pozvání přijali nejenom přední čeští odborníci, ale také přednášející ze Slovenska a Nizozemí. Témata Tilted implantáty – axiální zatěžování implantátů ano, nebo ne? Anatomické limity v implantologii Periimplantitida: onemocnění moderní doby Interakce pojivové tkáně s bioaktivním povrchem implantátů Sociální řešení – ano či ne? Okamžitá implantace a okamžité funkční zatížení – dlouhodobé výsledky Funkční a estetická rekonstrukce implantátů CAD/CAM technikou Přednášející Curd Bollen (NL) Taťjana Dostálová Ladislav Dzan Dana Kopecká Pavel Poleník Tomáš Siebert (SK) Antonín Šimůnek Prezentace posterů Všechny účastníky zveme k prezentaci posterů....

BioniQ

Based on 20 years of experience in manufacturing dental implants, a new implant system was launched.

Scientific Seminar IMPLANTOLOGY 2013 in Prague

The seventeenth annual scientific implantology seminar took place on the 19th of April 2013 at the Clarion hotel in Prague. More than two hundred dentists and dental technicians who work in implantology participated; from the Czech Republic as well as from abroad. The participants were welcomed and the seminar was commenced by the director of the LASAK Company, Jakub Strnad, Ph.D., followed by Prof. Dr. Jiri Mazanek, DSc., as the chairman of the morning lecture sessions....

IDS in Cologne

LASAK will take part in the world’s leading trade fair for the dental sector – International Dental Show in Cologne, Germany on 12–16 March 2013. IDS 2013 in Cologne is the world’s leading trade show and sector meeting place for decision-makers from dental practices, dental labs, the specialist dental trade, the dental industry and from research and development. The exhibitors present the latest products and technological process developments for dental medicine and dental technology here. The future orientated exhibition and communications platform provides you with new insights and perspectives....

Dentistry Show Birmingham

LASAK will take part in the international dental conference and exhibition The Dentistry Show in Birmingham, UK on 1–2 March 2013. The Dentistry Show 2013 is a world class, two-day, action-packed clinical and business conference and major exhibition for Dental professionals on Friday 1st March and Saturday 2nd March at NEC Birmingham. With over 60 speakers, 6 conference streams and more than 300 exhibitors dedicated to helping dental practices and laboratories, there really is plenty for you to listen to,...

Indian distributor&#8217;s training

A training course was underway on 19 and 20 November 2012, this involving partners of LASAK´s Indian distributor. The first day of the session was held at the Research and Development Center for Dental Implantology and Tissue Regeneration, Prague – Hloubetin, while on the following day the physicians underwent an internship at the Implantology Centre of the Dental Clinic, Charles University´s Faculty of Medicine and University Hospital, Hradec Kralove. At the Prague center, topics covered by the lecturers comprised theoretical background and managing the IMPLADENT system....

Seminář IMPLANTOLOGIE 2013

17. ročník implantologického semináře Odborný seminář IMPLANTOLOGIE pořádá společnost LASAK již sedmáctý rok. Uskuteční se v pátek 19. dubna 2013 v Clarion Congress Hotelu Prague. Pozvání přijali nejenom přední čeští odborníci, ale také přednášející z Itálie a Holandska. Témata Krátké, kratší, nejkratší – vliv délky implantátu na dlouhodobý výsledek implantace. Stabilita tkání v okolí implantátu. 20 let implantologie v ČR. Dohnali jsme svět, kam míříme dál? V.I.P. rekonstrukce chrupu – případy, kdy na esteticky dokonalém chrupu opravdu záleží....

Implantology course for Taiwanese doctors

Full-day training in the IMPLADENT system was held in July at the Research and Development Center for Dental Implantology and Tissue Regeneration LASAK. Lessons learned in the daily practice were shared with Taiwanese doctors by Dr. Volker Bonatz, Germany, and Dr. Michal Zitnansky, CZ-Jesenik. After focusing on surgical planning of treatment, discussing proactively with the participants the proposals for the treatment of individual patients in his practice from the simplest cases, such as single tooth replacements,...

Cranio-Oss

The LASAK company started producing individual artificial replacements for the anatomical reconstruction of bone defects in the cranial and facial area.

Cast-On abutment – time and cost-effective solution

LASAK launched the customizable abutment Cast-On in spring 2012. The LASAK Cast-On abutment is an universal easy-to-process solution for implant-supported restorations. The Cast-On abutment consists of a prefabricated, cobalt-chrome, nickel-free alloy base, a plastic modeling sleeve and a fixing screw. Our Cast-On abutment offers a cost-effective option for castable abutments made from gold alloys and is available for all major implant systems. It gives the technician maximum flexibility for customized contouring of the abutment and gingival emergence profile in accordance with individual requirements....

BioCam technology successfully introduced to the Czech market

Last year, LASAK introduced BioCam superstructures for implants of all leading implant systems to the Czech market. Several hundred satisfied patients have already benefited from the superior accuracy of BioCam technology. Clients using BioCam technology appreciate the option for direct screw fixation into the implants without sticking any contact members (interfaces). This eliminates the formation of additional gaps as potential sources of bacterial contamination. Unmatched accuracy and a guaranteed high-precision scanning process ensure a perfect fit of the superstructure and even symmetrical loading of the dental implants....

Looking back at the seminar IMPLANTOLOGY 2012

The 16th annual scientific implantology seminar was organized by the company LASAK on 20 April 2012 at the Clarion Congress Hotel Prague. The seminar was attended by nearly 200 dentists and dental technicians from the Czech Republic and abroad. Jakub Strnad, PhD, director of LASAK, opened the seminar and welcomed the participants. He was followed by Prof. Jiří Mazánek, MD, DS, as moderator for the morning lecture blocks. The introductory lecture by Prof. Antonín Šimůnek, MD,...

Arab Health Exhibition

LASAK will take part in the international healthcare exhibition Arab Health in Dubai from 23–26 January 2012. Together with other Czech medical companies LASAK has the opportunity to present its products to the Middle East market. It will be the 37<sup>th</sup> year of this exhibition which is traditionally completed with a medical conference. Visit us in Hall Shaikh Saeed, Stand SAJ33....

World-class research centre opened

Today, the LASAK company opens a new research centre in Prague’s Hloubětín quarter, the construction of which was supported by European Union funds. Thanks to the project, it will be possible to develop better quality materials for the regeneration of bone tissue and dental implants, which will shorten the treatment time and be markedly cheaper than foreign products. LASAK, which has built the new research centre, is the only Czech manufacturer of ceramic materials for bone tissue replacements,...

LASAK CadCam

The LASAK company launches a unique production system of precisely milled CAD/CAM dental constructions for implants.

New address – Prague-Hloubetin

We are delighted to inform you that our headquarters has moved to our newly-constructed Design and Development Center for Dental Implantology and Bone Regeneration: LASAK Ltd. Českobrodská 1047/46 190 01 Prague 9 – Hloubětín Czech Republic GPS: 50°5´35,631&#8243;N, 14°31´33,078&#8243;E Our telephone and fax numbers remain the same: Phone: +420 224 315 663, +420 233 324 280 Fax: +420 224 319 716....

Scientific Award 2010

LASAK was awarded the prestigious Czech Scientific Award, &#8220;Ceska Hlava 2010&#8221; (Czech Brain), in the category Industry Award for Innovation in a Dental Implant System. These innovations included the unique bioactive surface finish and an advanced implant design which enable safer and faster healing of the implant in the bone tissue. Each year, an eleven member jury decides awarding of this highly respected Czech scientific Award. As a result of its long-term, continuous research into biomaterial-body environment interactions,...

Scientific Award

The LASAK company was awarded the prestigious Czech Scientific Award, “Ceska Hlava 2010” in the category Industry Award for Innovation in a Dental Implant System.

OssaBase-HA

Introduction of a synthetic bone regeneration material based on hydroxyapatite with a low substitution rate.

Appointment of a new CEO

The LASAK company owners appointed Ing. Jakub Strnad, Ph.D,. as the new managing director during the annual meeting.

BIO-surface

The successful development of a breakthrough technology of titanium surface treatment. LASAK was the first company to launch a bioactive, hydrophilic, nanostructured surface treatment of dental implants (BIO-surface) on the European market.

IMPLASPIN

The product portfolio was widened with intervertebral disc replacements

IMPLADENT 2.9

The LASAK company was one of the first implant manufacturers to produce narrow-diameter implants with a diameter of only 2.9 mm. By 2006, as the first implant manufacturer on the European market, the company was already able to present a nine-year clinical study with excellent results.

PORESORB-TCP

Introduction of an innovative synthetic tricalcium-phosphate-based material for bone regeneration.

BAS-0, BAS-R, BAS-HA

In the same year, LASAK also launched synthetic replacements for bone tissue based on glass ceramics and ceramics.

IMPLADENT

The first implant system of the LASAK company, IMPLADENT, was launched on the market.

Foundation

LASAK company founded by doc. Ing. Zdenek Strnad, CSc,. and Ing. Igor Riedl, CSc.